Pelarik gelendong plumbum/suapanWeiler
Commodor Geometrisch Überholt
Pelarik gelendong plumbum/suapan
Weiler
Commodor Geometrisch Überholt
Keadaan
Terpakai
Lokasi
Ubstadt-Weiher 

Gambar menunjukkan
Tunjukkan peta
Data mesin
- Nama mesin:
- Pelarik gelendong plumbum/suapan
- Pengeluar:
- Weiler
- Keadaan:
- hampir baru (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Harga & Lokasi
- Lokasi:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

Hubungi
Butiran tawaran
- ID iklan:
- A18287011
- Kemas kini:
- terakhir pada 17.01.2025
Penerangan
Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines
Technical data:
>> Machine no. 1824
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 13 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55029 size 5
>> Tailstock MK 4
>> Feed rates from 0.026 to 0.888 mm / rev
>> Possible threads metric, inch, module and diametric pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle brake can be switched on
>> Drive power 2.0/4.0 KW
Ksdevrcqdspfx Afredi
>> Length 2.2 m, height 1.5 m, depth 1 m
Accessories and equipment:
>> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws
>> Mulifix size B with 2 pcs steel holders NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle protection
>> Spindle brake
>> 2 emergency stops
On request: covers for the guide. and feed spindle
About the machine:
A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint.
The Multifix and chuck accessories are new.
For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Technical data:
>> Machine no. 1824
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 13 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55029 size 5
>> Tailstock MK 4
>> Feed rates from 0.026 to 0.888 mm / rev
>> Possible threads metric, inch, module and diametric pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle brake can be switched on
>> Drive power 2.0/4.0 KW
Ksdevrcqdspfx Afredi
>> Length 2.2 m, height 1.5 m, depth 1 m
Accessories and equipment:
>> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws
>> Mulifix size B with 2 pcs steel holders NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle protection
>> Spindle brake
>> 2 emergency stops
On request: covers for the guide. and feed spindle
About the machine:
A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint.
The Multifix and chuck accessories are new.
For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Hantar permintaan
Telefon & Faks
+49 7251 ... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Iklan kecil
Ubstadt-Weiher
9,907 km
Pelarik pusat
WeilerCommodor Geometrisch Überholt
WeilerCommodor Geometrisch Überholt
Iklan kecil
Witten
9,972 km
Pelarik tengah dan pelarik gelendong
COLCHESTERSTUDENT 2500
COLCHESTERSTUDENT 2500
Iklan kecil
Ubstadt-Weiher
9,907 km
Pelarik gelendong plumbum/suapan
WeilerCommodor Geometrisch Überholt
WeilerCommodor Geometrisch Überholt
Iklan kecil
Wetzlar
9,900 km
Pelarik gelendong plumbum/suapan
CONTURSJ-520/1500 VS
CONTURSJ-520/1500 VS
Iklan kecil
Trittau
9,746 km
Pelarik pusat
WeilerDA 210 AC
WeilerDA 210 AC
Iklan kecil
Ubstadt-Weiher
9,907 km
Pelarik gelendong plumbum/suapan
WEILERCommodor B - Teilüberholt
WEILERCommodor B - Teilüberholt
Iklan kecil
Ahaus
9,987 km
Pelarik-konvensional-elektronik
WEILERMATADOR VS 2
WEILERMATADOR VS 2
Iklan kecil
Bienne
10,029 km
MESIN PENGILANG
Schaublin13
Schaublin13
Iklan kecil
Wiefelstede
9,900 km
Pelarik 420 x 1340 mm
Weisser**PF200
Weisser**PF200
Iklan kecil
Concordia Sagittaria
9,617 km
Kren julur berputar 360 °
AXA0135
AXA0135
Iklan anda telah berjaya dipadamkan
Berlaku ralat




































































































