Pelarik gelendong plumbum/suapanWeiler
Commodor Geometrisch Überholt
Pelarik gelendong plumbum/suapan
Weiler
Commodor Geometrisch Überholt
Keadaan
Terpakai
(berfungsi sepenuhnya)
Lokasi
Ubstadt-Weiher 

Data mesin
- Nama mesin:
- Pelarik gelendong plumbum/suapan
- Pengeluar:
- Weiler
- Keadaan:
- hampir baru (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Harga & Lokasi
- Lokasi:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

Hubungi
Butiran tawaran
- ID iklan:
- A18286861
- Kemas kini:
- terakhir pada 17.01.2025
Penerangan
Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines
Technical data:
>> Machine no. 2020
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 13 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55029 size 5
>> Tailstock MK 4
>> Feeds from 0.026 to 0.888 mm / rev
>> Possible threads metric, inch, module and diametrical pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle brake can be switched on
Itedpfx Aovrckqjpnjl
>> Drive power 2.0/4.0 KW
>> Length 2.2 m, height 1.5 m, depth 1 m
Accessories and equipment:
>> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws
>> Mulifix size B with 2 pcs steel holders NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle protection
>> Spindle brake
>> 2 emergency stops
On request: covers for the guide. and feed spindle
About the machine:
A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint.
The Multifix and chuck accessories are new.
For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Technical data:
>> Machine no. 2020
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 13 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55029 size 5
>> Tailstock MK 4
>> Feeds from 0.026 to 0.888 mm / rev
>> Possible threads metric, inch, module and diametrical pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle brake can be switched on
Itedpfx Aovrckqjpnjl
>> Drive power 2.0/4.0 KW
>> Length 2.2 m, height 1.5 m, depth 1 m
Accessories and equipment:
>> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws
>> Mulifix size B with 2 pcs steel holders NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle protection
>> Spindle brake
>> 2 emergency stops
On request: covers for the guide. and feed spindle
About the machine:
A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint.
The Multifix and chuck accessories are new.
For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Hantar permintaan
Telefon & Faks
+49 7251 ... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Iklan kecil
Ubstadt-Weiher
9,907 km
Pelarik gelendong plumbum/suapan
WeilerCommodor Geometrisch Überholt
WeilerCommodor Geometrisch Überholt
Iklan kecil
Balaguer
10,625 km
Mesin pengisar permukaan
STANKOIMPORT3E711B
STANKOIMPORT3E711B
Iklan kecil
Hungary
9,967 km
DMG MORI CMX 600 V
DMG MORICMX 600 V
DMG MORICMX 600 V
Iklan kecil
Schwäbisch Gmünd
9,828 km
Pelarik jenis Switzerland
STAR MicronicsSA16R
STAR MicronicsSA16R
Iklan kecil
Soerendonk
10,097 km
Mesin pengilangan CNC
BridgeportInteract 4
BridgeportInteract 4
Iklan kecil
Leipheim
9,796 km
Pelarik CNC
DMT KernCD402x1000
DMT KernCD402x1000
Iklan kecil
Borgo San Dalmazzo
10,046 km
Pusat pemesinan universal
MIKRONHSM 600 U PROD MOD
MIKRONHSM 600 U PROD MOD
Iklan kecil
Jerman
9,967 km
SUMITOMO SHI DEMAG Intelect 2 50/370-110
Sumitomo (SHI) DemagIntelect 2 50/370-110
Sumitomo (SHI) DemagIntelect 2 50/370-110
Iklan kecil
Berlin
9,555 km
Sistem suapan akhbar
CoiltecCOMPACT FEEDER CMKS H3
CoiltecCOMPACT FEEDER CMKS H3
Iklan kecil
Hergensweiler
9,838 km
Meja putar kimpalan, pusing putar,
ProtecW 5000
ProtecW 5000
Iklan anda telah berjaya dipadamkan
Berlaku ralat









































































































