Pusat pemusingan CNCEMCO
Hyperturn 690MC (TCMY) Plus
Data mesin
- Nama mesin:
- Pusat pemusingan CNC
- Pengeluar:
- EMCO
- Tahun pembuatan:
- 2005
- Keadaan:
- dibaik pulih sepenuhnya (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Panjang pemesinan bubut:
- 1,500 mm
- Diameter pusingan:
- 520 mm
- Kelajuan gelendong (maks.):
- 3,200 rpm
- Jarak gerakan paksi X:
- 280 mm
- Jarak gerakan paksi Z:
- 1,055 mm
- Berat kepingan kerja (maks.):
- 1,200 kg
penyediaan
- Lokasi:
- Hlavní město Praha, Republik Czech
– Jarak: lebih kurang 9,486 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
TECHNICAL DETAILS
Swing diameter over bed: 700 mm
Max. turning diameter: 520 mm
Spindle distance: 1,500 mm
Travel X1: 280 mm
Travel Z1: 1,055 mm
Travel Z2: 1,090 mm
Control system: Siemens Sinumerik 840D
Main spindle
Spindle head: DIN 55026 A2-8
Passage through the drawbar: 95 mm
Inner diameter of front bearing: 160 mm
Inner diameter of rear bearing: 150 mm
Diameter of clamping cylinder: 315 mm
Speed: 750–3,200 rpm
Power (S1/S6 40%): 37/54 kW
Max. torque (S1/S6 40%): 470/687 Nm
Max. workpiece weight in the chuck: 400 kg
Center of gravity distance from chuck: 175 mm
Max. workpiece weight between chuck and tailstock: 1,200 kg
Counter spindle
Spindle head: DIN 55026 A2-8
Passage through the drawbar: 95 mm
Inner diameter of front bearing: 160 mm
Inner diameter of rear bearing: 150 mm
Diameter of clamping cylinder: 315 mm
Speed: 500–3,200 rpm
Power (S1/S6 40%): 17/25 kW
Max. torque (S1/S6 40%): 324/478 Nm
tailstock
Travel: 1,050 mm
Min./Max. distance between spindle and tailstock: 320–1,370 mm
Min./Max. feed force: 50–2,000 daN
Spindle taper: MK 5
feeds
Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min
Ball screw X1-X2, pitch: 40 x 20 mm
Ball screw Z1-Z2, pitch: 50 x 20 mm
Ball screw counter spindle, pitch: 50 x 20 mm
Feed force X1-X2: 1,640 daN
Feed force Z1-Z2: 1,640 daN
Feed force counter spindle: 1,640 daN
General overhaul and maintenance
- Replacement of the X-axis ball screw (upper turret): 2011
- Replacement of the clamping cylinder (spindle no. 1): approx. 2018
- Replacement of the bearings of both spindles: 2011
- Overhaul of both revolvers: ongoing
EQUIPMENT
- Counter spindle
- 2 revolvers with driven tools
- Y-axis of the upper turret: start at 50 mm
- Driven tools: 2 straight + 2 angled
- Holder: 2 in the hole + 2 on the surface
- Clamping jaws: 2x hard base jaws
- Complete documentation for the machine
- Replacement turret (after complete overhaul)
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A18658671
- Nombor rujukan:
- AUC-2503017
- Kemas kini:
- terakhir pada 24.03.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Oelde GILDEMEISTERCTX beta 1250 V4
Kirchheim bei München MuellerSD 250 /200.1. 2
Brieselang AGEOGHP 125 HK
Hessisch Lichtenau WALTHER TROWALCLS-230
Estavayer StuderS12 and S22
Jerman HurcoVMX 84 T
Jerman abaMultiline 2510 CNC
Jerman EMCOTurn 365/42
Metzingen WALDRICH-COBURG16 GLS 25-90
Loyettes ChironFZ18L X2000mm 4 axis nikken
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.