EMCO E45EMCO
E45
EMCO E45
EMCO
E45
Tahun pembuatan
2019
Keadaan
Terpakai
Lokasi
Austria 

Harga & Lokasi
- Lokasi:
- , Austria

Hubungi
Butiran teknikal
Spindel
Kuasa motor gelendong:
13,000 W
Kelajuan gelendong (maks.):
6,300 rpm
Spesifikasi gandar
Jarak gerakan paksi X:
160 mm
Jarak gerakan paksi Z:
510 mm
Maklumat lanjut
Bilangan gandar:
3
Butiran tawaran
- ID iklan:
- A21106862
- Nombor rujukan:
- AT-TUR-EMC-2019-00001
- Kemas kini:
- terakhir pada 02.09.2026
Penerangan
This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine.
• Connection: KK5 (DIN 55026)
• Bar capacity: 45 mm
• Drive power: 13 kW
• Speed range: 0–6300 rpm
• C-axis on main spindleTool turret
• 12-position VDI30 axial
• Directional logic for up to 6 driven tools
• Driven tools: max. 4 kW / max. 16 Nm
• Driven tools speed: 0–5000 rpmTailstock
• Programmable, hydraulically actuated
• Max. clamping force: 6000 N
• Morse taper: MK4
• Hollow clamping cylinder incl. draw tubeControl & software
• SINUMERIK 828D OPERATE
• SHOPTURN dialog programming
• USB interface
• Network / Ethernet
• 10.4" TFT color monitor
• 3D simulationMedia & machine features
• Machine light
• Coolant system incl. pump (3.5 bar)
• Hydraulic unit
• Chip conveyor interface
• CE certificate
• DocumentationTool measurement (E45)
• Measuring arm fixed in the work area
• Tool measurement on the turret
• Short setup times / precise measurement / cost-efficientWorkpiece clamping
• 3-jaw chuck KK5
• Max. speed: 6300 rpm
• Diameter: 20 mm
• Soft + hard jawsOther (machine-related)
• Water gun
• Air to spindle
• Oil/coolant separator
• Automatic coolant monitoring
• Electronic handwheel
• Tool change guard
Knedpfx Adeyffgrjled
• Hydraulic connections
• Pneumatic connections
• Machine packaging: pallet + roll-up cover
Additional equipment
Bar feeder / magazine (SL1200 – as referenced)
• Bar length: 850–1200 mm
• Bar diameter: Ø 8–95 mm
• Max. feed rate: 60 m/min
• Bar change: approx. 3 s
• Magazine change: approx. 15 s
• Material support area: 550 × 1210 mm
• Material capacity: 10 × Ø 55 mm
• Operating side: right
• Power supply: 240 V DC/DC
• Air supply: 6 bar
• Dimensions: 1700 × 1250 × 1090–1380 mm
• Weight: approx. 500 kg
• Safety device: CE
• High-speed function
• DocumentationSpindle extension (for bar feeder use)
• E45 / MT45 / HT45 → DM45
• For 45 mm spindle
• Short bars up to 1100 mm
• With reducing sleeves (3 pieces)
• Required for use with SL1200Chip conveyor
• Hinged belt conveyor
• Discharge height: 1200 mmHigh-pressure coolant unit
• 14 bar / 50 Hz
• Additional high-pressure pump
• For tools with internal coolant
• Interface & softwareRobot interface
• PROFI-NET interface
• 24 V signals
• Safety release
• Automatic/manual operation switchingAdditional components
• PC keyboard USB (QWERTY)
• Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware
• 4× vibration absorbers
• 4× mounting brackets
• 4× heavy-duty anchorsParts collection device
• Pneumatically operated
• Max. part length: 120 mm
• Max. diameter: 45 mm (51 mm)
• Max. weight: 2 kg
• Collection box / conveyor belt
Technical Specification
Counter Spindle No
Driven Tools Yes
• Connection: KK5 (DIN 55026)
• Bar capacity: 45 mm
• Drive power: 13 kW
• Speed range: 0–6300 rpm
• C-axis on main spindleTool turret
• 12-position VDI30 axial
• Directional logic for up to 6 driven tools
• Driven tools: max. 4 kW / max. 16 Nm
• Driven tools speed: 0–5000 rpmTailstock
• Programmable, hydraulically actuated
• Max. clamping force: 6000 N
• Morse taper: MK4
• Hollow clamping cylinder incl. draw tubeControl & software
• SINUMERIK 828D OPERATE
• SHOPTURN dialog programming
• USB interface
• Network / Ethernet
• 10.4" TFT color monitor
• 3D simulationMedia & machine features
• Machine light
• Coolant system incl. pump (3.5 bar)
• Hydraulic unit
• Chip conveyor interface
• CE certificate
• DocumentationTool measurement (E45)
• Measuring arm fixed in the work area
• Tool measurement on the turret
• Short setup times / precise measurement / cost-efficientWorkpiece clamping
• 3-jaw chuck KK5
• Max. speed: 6300 rpm
• Diameter: 20 mm
• Soft + hard jawsOther (machine-related)
• Water gun
• Air to spindle
• Oil/coolant separator
• Automatic coolant monitoring
• Electronic handwheel
• Tool change guard
Knedpfx Adeyffgrjled
• Hydraulic connections
• Pneumatic connections
• Machine packaging: pallet + roll-up cover
Additional equipment
Bar feeder / magazine (SL1200 – as referenced)
• Bar length: 850–1200 mm
• Bar diameter: Ø 8–95 mm
• Max. feed rate: 60 m/min
• Bar change: approx. 3 s
• Magazine change: approx. 15 s
• Material support area: 550 × 1210 mm
• Material capacity: 10 × Ø 55 mm
• Operating side: right
• Power supply: 240 V DC/DC
• Air supply: 6 bar
• Dimensions: 1700 × 1250 × 1090–1380 mm
• Weight: approx. 500 kg
• Safety device: CE
• High-speed function
• DocumentationSpindle extension (for bar feeder use)
• E45 / MT45 / HT45 → DM45
• For 45 mm spindle
• Short bars up to 1100 mm
• With reducing sleeves (3 pieces)
• Required for use with SL1200Chip conveyor
• Hinged belt conveyor
• Discharge height: 1200 mmHigh-pressure coolant unit
• 14 bar / 50 Hz
• Additional high-pressure pump
• For tools with internal coolant
• Interface & softwareRobot interface
• PROFI-NET interface
• 24 V signals
• Safety release
• Automatic/manual operation switchingAdditional components
• PC keyboard USB (QWERTY)
• Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware
• 4× vibration absorbers
• 4× mounting brackets
• 4× heavy-duty anchorsParts collection device
• Pneumatically operated
• Max. part length: 120 mm
• Max. diameter: 45 mm (51 mm)
• Max. weight: 2 kg
• Collection box / conveyor belt
Technical Specification
Counter Spindle No
Driven Tools Yes
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Hallein
9,591 km
E 45 TCM, tahun pembuatan 2011 (jualan terus daripada pelanggan)
EMCOEMCOTURN E 45 TCM, Bj. 2011, R2EZ4703
EMCOEMCOTURN E 45 TCM, Bj. 2011, R2EZ4703
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Metzingen
9,865 km
Mesin pengisar permukaan - mendatar
JUNGHF 50 RD
JUNGHF 50 RD
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Graz
9,414 km
Pelarik CNC
EMCOEMCOTURN E45/3.573 h/ durch EMCO geprüft
EMCOEMCOTURN E45/3.573 h/ durch EMCO geprüft
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Hermaringen
9,794 km
Pelarik CNC
EMCOEMCOTURN E45
EMCOEMCOTURN E45
Berjaya
Mesej anda telah dihantar.
Iklan kecil
München
9,700 km
Pusat pemesinan CNC universal
DMG MoriDMU 50 3rd
DMG MoriDMU 50 3rd
Berjaya
Mesej anda telah dihantar.
Lelong
Lelong telah tamat
Hessen
9,884 km
Mesin bubut CNC
EMCOTURN E45
EMCOTURN E45
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Urgnano
9,862 km
Pusat pusingan dan pengilangan CNC
BIGLIAB 465 Y2
BIGLIAB 465 Y2
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Jerman
9,760 km
Pusat pusing dan penggilingan CNC
DMG MORICTX Beta 500 V6
DMG MORICTX Beta 500 V6
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Desio
9,899 km
Pusat pusingan dan pengilangan CNC
EMCOHyperTurn 45 SM2Y
EMCOHyperTurn 45 SM2Y
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Root
9,946 km
Pemegang alat
VDI30
VDI30
Iklan anda telah berjaya dipadamkan
Berlaku ralat



















































































































