Mesin sandblasting CM MonorailCM Surface treatment Spa.
M1500 Monorail
Mesin sandblasting CM Monorail
CM Surface treatment Spa.
M1500 Monorail
tahun pembuatan
1990
Keadaan
Terpakai
Lokasi
Soerendonk 

Gambar menunjukkan
Tunjukkan peta
Data mesin
- Nama mesin:
- Mesin sandblasting CM Monorail
- Pengeluar:
- CM Surface treatment Spa.
- Model:
- M1500 Monorail
- Nombor mesin:
- S3370
- Tahun pembuatan:
- 1990
- Keadaan:
- dibaik pulih bengkel (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 10 h
Harga & Lokasi
- Lokasi:
- Vlassloot 5, 6027 RS Soerendonk, NL

Hubungi
Butiran teknikal
- Jenis arus masuk:
- tiga fasa
Butiran tawaran
- ID iklan:
- A20370760
- Nombor rujukan:
- M1500
- Kemas kini:
- terakhir pada 24.10.2025
Penerangan
CM M1500 Shot Blasting Machine
CM S 3370
Maximum product dimensions:
- Maximum product height: 1500 mm (measured under the hook)
- Maximum diameter: Ø 1200 mm
- Maximum weight: 700 kg
- Equipped with 2x load-bearing hooks
- 3x Turbine Ø 330 mm, 6-blade configuration
- 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors
- Hook movement manual
- Automated hook feed into the machine
- Automated door operation
- Fully overhauled CM shot blasting installation
Mechanical and electrical systems have been completely refurbished to specification:
Mechanical:
- Motors & drives completely disassembled, fitted with new bearings and new seals
Pjdpfx Afjxqzmkjfogu
- Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra
- All augers replaced and fitted with HARDOX auger flights
- All auger bearings replaced
- Abrasive media elevator fitted with new elevator belt, return wheels & bearings
- All chain drives & sprockets replaced
- Hook feed system to machine modernized
- Hook drive system completely overhauled
- Compressed air supply replaced
- Pneumatic cylinders & valves renewed/overhauled
- 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm
Electrical:
- Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors)
- Siemens electric motors preventively rewound & tested, fitted with new bearings
- Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel
- Electrical control panel completely renewed with new relays, fully compliant with 2023 standards
- Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process
- Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits
The machine is fully operational and available for immediate sale.
The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media).
1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
CM S 3370
Maximum product dimensions:
- Maximum product height: 1500 mm (measured under the hook)
- Maximum diameter: Ø 1200 mm
- Maximum weight: 700 kg
- Equipped with 2x load-bearing hooks
- 3x Turbine Ø 330 mm, 6-blade configuration
- 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors
- Hook movement manual
- Automated hook feed into the machine
- Automated door operation
- Fully overhauled CM shot blasting installation
Mechanical and electrical systems have been completely refurbished to specification:
Mechanical:
- Motors & drives completely disassembled, fitted with new bearings and new seals
Pjdpfx Afjxqzmkjfogu
- Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra
- All augers replaced and fitted with HARDOX auger flights
- All auger bearings replaced
- Abrasive media elevator fitted with new elevator belt, return wheels & bearings
- All chain drives & sprockets replaced
- Hook feed system to machine modernized
- Hook drive system completely overhauled
- Compressed air supply replaced
- Pneumatic cylinders & valves renewed/overhauled
- 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm
Electrical:
- Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors)
- Siemens electric motors preventively rewound & tested, fitted with new bearings
- Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel
- Electrical control panel completely renewed with new relays, fully compliant with 2023 standards
- Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process
- Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits
The machine is fully operational and available for immediate sale.
The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media).
1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Hantar permintaan
Telefon & Faks
+31 495 2... iklan
Iklan anda telah berjaya dipadamkan
Berlaku ralat




















































