Pelarik jenis SwitzerlandCitizen
M 16
Data mesin
- Nama mesin:
- Pelarik jenis Switzerland
- Pengeluar:
- Citizen
- Model:
- M 16
- Nombor mesin:
- 1216/0166
- Tahun pembuatan:
- 2000
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Kelajuan gelendong (maks.):
- 10,000 rpm
- Diameter bar (maks.):
- 16 mm
- Kelajuan gelendong lawan (maksimum):
- 8,000 rpm
- Bilangan slot dalam majalah alat:
- 21
- Peralatan:
- penyampai serpihan
penyediaan
- Lokasi:
- Nordrhein-Westfalen, Jerman
– Jarak: lebih kurang 9,885 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€1,000.00 (wajib)
percuma
Penerangan
TECHNICAL DETAILS
Max. bar diameter: 16 mm
Axes: 7 linear axes + C-axes for main & counter spindle
Main spindle
Spindle bore (main spindle): 18 mm
Main spindle motor power: 3.7 kW
Main spindle speed range: 10,000 rpm
Main spindle indexing: C-axis, full-C (0.001°)
Max. drilling diameter main spindle: 10 mm
Max. thread main spindle: M8 / M6
Counter spindle
Max. clamping diameter counter spindle: 16 mm
Workpiece length counter spindle: 125 mm
Max. drilling diameter counter spindle: 8 mm
Max. thread reverse side: M6
Speed range counter spindle: 250 – 6,000 rpm (Full C-axis)
Gang tool carrier
Max. drilling diameter: 4.8 mm
Max. thread: M4
Max. speed: 200 – 8,000 rpm
Turret
Max. drilling diameter: 4.8 mm
Max. thread: M5
Max. speed: 200 – 6,500 / 8,000 rpm
Driven tools on the rear side
Max. drilling diameter: 5 mm
Max. thread: M5
Max. speed: up to 8,000 rpm
Tools
Total tool capacity: 21 positions
Gang slide: 8 positions
Turret: 10 positions
Rear side tools: 3 positions
Tool shanks turning tool: 10 × 10 mm
Tool shank drill sleeves diameter: 19.05 mm
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A20555220
- Nombor rujukan:
- AUC-2511169
- Kemas kini:
- terakhir pada 18.11.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Nordrhein-Westfalen CitizenM 16
Kroasia CitizenCincom M16-4M8
Bienne CitizenCINCOM M16-III
Kroasia CitizenCincom M16-4M8
Furtwangen im Schwarzwald CitizenM16
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.