Pelarik jenis SwitzerlandCitizen
M 12
Data mesin
- Nama mesin:
- Pelarik jenis Switzerland
- Pengeluar:
- Citizen
- Model:
- M 12
- Nombor mesin:
- M212/0062
- Tahun pembuatan:
- 1999
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Panjang pemesinan bubut:
- 200 mm
- Kelajuan gelendong (maks.):
- 12,000 rpm
- Diameter bar (maks.):
- 12 mm
- Kelajuan gelendong lawan (maksimum):
- 6,000 rpm
- Peralatan:
- penyampai serpihan
penyediaan
- Lokasi:
- Nordrhein-Westfalen, Jerman
– Jarak: lebih kurang 9,884 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€1,000.00 (wajib)
percuma
Penerangan
In recent years, over €25,000 has been invested in maintenance and repair.
Occasionally a system error occurs (irregularly, e.g., after 2–5 days of operation); after switching the machine off and on, it is fully operational again.
TECHNICAL DETAILS
Max. bar diameter: 12 mm
Max. machining length: 200 mm
Axes: 7 linear axes + C-axes for main and sub spindle
Main spindle
Spindle bore max.: approx. 14 mm
Motor power: approx. 2.2 kW
Speed range: 200 – 12,000 rpm
Indexing: C-axis, full C (0.001°)
Front machining max. drilling diameter: 6 mm
Max. thread: M6
Sub spindle
Max. clamping diameter: 12 mm
Part length, rear side: 125 mm
Max. drilling diameter: 5 mm
Max. thread: M5
Speed range: 250 – 6,000 rpm
Gang-type tool carrier
Max. drilling diameter: 5 mm
Max. thread: M4
Max. speed: 200 – 8,000 rpm
Turret
Max. drilling diameter: 5 mm
Max. thread: M5
Max. speed: 200 – 6,500 rpm
Rear tools
Max. drilling diameter: 5 mm
Max. thread: M5
Speed: up to 8,000 rpm
Tools
Tool stations: 21 positions
Gang slide: 8 positions
Turret: 10 positions
Rear side tools: 3 positions
Tool shank turning tool
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A20555355
- Nombor rujukan:
- AUC-2511171
- Kemas kini:
- terakhir pada 18.11.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Nordrhein-Westfalen CitizenM 12
Nordrhein-Westfalen CitizenM 16
Nordrhein-Westfalen CitizenL 32 VII
Nordrhein-Westfalen LNSQuick Load Servo II
Międzyrzecze Górne CitizenCincom M12
Baden-Württemberg CitizenCincom L12X (L12-2M10)
Hajdúböszörmény CitizenCincom L20E-2M12
Międzyrzecze Górne CitizenCincom M12
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.