Mesin kimpalan elemen pemanas untuk plastikBRANSON Emerson
HP60/40 Heizelementschweißen
Mesin kimpalan elemen pemanas untuk plastik
BRANSON Emerson
HP60/40 Heizelementschweißen
EXW Harga tetap ditambah cukai perkhidmatan
€7,000
Tahun pembuatan
1999
Keadaan
Terpakai
Lokasi
Saal an der Donau 

Data asas
- Nama mesin:
- Mesin kimpalan elemen pemanas untuk plastik
- Pengeluar:
- BRANSON Emerson
- Model:
- HP60/40 Heizelementschweißen
- Nombor mesin:
- SE 01510 A10
- Tahun pembuatan:
- 1999
- Keadaan:
- sangat baik (terpakai)
Harga & Lokasi
EXW Harga tetap ditambah cukai perkhidmatan
€7,000
- Lokasi:
- Kelheimer Str. 32a., 93342 Saal an der Donau, Deutschland

Hubungi
Butiran teknikal
Lebar kerja:
620 mm
Butiran tawaran
- ID iklan:
- A21251177
- Kemas kini:
- terakhir pada 21.09.2026
Penerangan
Heating Element Welding Machine HP60/40 by BRANSON
The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump.
Only a few operating hours (approx. 6,800 hours).
Usable heating element area: width 600 mm x depth 400 mm
Max. workpiece dimensions:
Ibjdpfxsykvdlo Adrjd
- Max. width: 620 mm
- Max. depth: 420 mm
- Max. upper height: 350 mm
- Max. lower height: 350 mm
(Combinations of part heights possible, depending on contour)
- Max. processing temperature for contact method: 400°C
The modular frame design allows for easy conversion and retrofitting.
The side doors and the front door in the welding area can be easily opened (for rapid retooling).
The automatic safety lift door ensures a high level of operator safety.
The temperature control units on the operator panel have actual/target displays.
The control device is a Siemens PLC HMI.
The machine is controlled by a Siemens PLC (S7-300 controller).
Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating.
The pin systems in the tool mounting surfaces ensure reproducible positioning.
Advantages of heating element welding technology:
- Reliable welding of workpieces with low or varying wall thicknesses.
- Low scrap rate due to dimensionally accurate and repeatable welds.
- Precise time, temperature, and force control enable welding of sensitive parts.
- Virtually all thermoplastics can be welded with this process.
- Different thermoplastic types can be joined (compatibility needs to be verified).
Technical data of the machine:
- Power supply: 3 x 400 V AC + N + PE
- Power: 25 kVA
- Rated current: 20 A
- Required cable cross-section: 5 cables, each 6 mm²
- Required pneumatic connection: 6 bar
Machine dimensions:
- Machine width: approx. 1.22 m
- Machine width with operator panel: approx. 1.8 m
- Machine depth: approx. 2.1 m
- Machine depth with operator panel: approx. 2.6 m
- Machine height: approx. 2.4 m
- Machine height with raised safety door: approx. 2.85 m (open door)
Machine weight: approx. 2.2 t
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump.
Only a few operating hours (approx. 6,800 hours).
Usable heating element area: width 600 mm x depth 400 mm
Max. workpiece dimensions:
Ibjdpfxsykvdlo Adrjd
- Max. width: 620 mm
- Max. depth: 420 mm
- Max. upper height: 350 mm
- Max. lower height: 350 mm
(Combinations of part heights possible, depending on contour)
- Max. processing temperature for contact method: 400°C
The modular frame design allows for easy conversion and retrofitting.
The side doors and the front door in the welding area can be easily opened (for rapid retooling).
The automatic safety lift door ensures a high level of operator safety.
The temperature control units on the operator panel have actual/target displays.
The control device is a Siemens PLC HMI.
The machine is controlled by a Siemens PLC (S7-300 controller).
Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating.
The pin systems in the tool mounting surfaces ensure reproducible positioning.
Advantages of heating element welding technology:
- Reliable welding of workpieces with low or varying wall thicknesses.
- Low scrap rate due to dimensionally accurate and repeatable welds.
- Precise time, temperature, and force control enable welding of sensitive parts.
- Virtually all thermoplastics can be welded with this process.
- Different thermoplastic types can be joined (compatibility needs to be verified).
Technical data of the machine:
- Power supply: 3 x 400 V AC + N + PE
- Power: 25 kVA
- Rated current: 20 A
- Required cable cross-section: 5 cables, each 6 mm²
- Required pneumatic connection: 6 bar
Machine dimensions:
- Machine width: approx. 1.22 m
- Machine width with operator panel: approx. 1.8 m
- Machine depth: approx. 2.1 m
- Machine depth with operator panel: approx. 2.6 m
- Machine height: approx. 2.4 m
- Machine height with raised safety door: approx. 2.85 m (open door)
Machine weight: approx. 2.2 t
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2025
1 Iklan dalam talian
Hantar permintaan
Telefon & Faks
+49 9441 ... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Langenfeld (Rheinland)
10,003 km
Mesin cetak digital
XeroxiGen 5 Press incl. 5th colour
XeroxiGen 5 Press incl. 5th colour
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Weesp
10,119 km
Pengawal Pencetak / RIP
Fiery / XeroxEX-P6 Fiery for Xerox Iridesse
Fiery / XeroxEX-P6 Fiery for Xerox Iridesse
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Heilbronn
9,864 km
Robot ANGEL VIPER (art.5137)
ENGEL VIPER20 RC 200
ENGEL VIPER20 RC 200
Berjaya
Mesej anda telah dihantar.
Iklan kecil
София
8,776 km
Mesin folder glu
OmegaOMEGA 130 4- 6- corner
OmegaOMEGA 130 4- 6- corner
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Zuchwil
10,008 km
Sistem kimpalan ultrasonik
MecasonicMCS2 CAB
MecasonicMCS2 CAB
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Hochdorf
9,850 km
Unit Penyejuk Suhu (TCU)
SingleWater Advanced WP7
SingleWater Advanced WP7
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Langenfeld (Rheinland)
10,003 km
Mesin cetak digital
Xerox Iridesse Production Press incl.Fiery, paper deck, stacker
Xerox Iridesse Production Press incl.Fiery, paper deck, stacker
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Weesp
10,119 km
Mesin penyalin pejabat
XeroxVersaLink C7100 serie
XeroxVersaLink C7100 serie
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Trieste
9,544 km
Mesin cetak digital
XEROXCOLOUR C60
XEROXCOLOUR C60
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Wöllstadt
9,886 km
3Ultraschall VE20 Microbond SCI 3x125
Herrmann UltraschallUltraschall VE20 Microbond SCI (Q)
Herrmann UltraschallUltraschall VE20 Microbond SCI (Q)
Iklan anda telah berjaya dipadamkan
Berlaku ralat























































































