Mesin acuan suntikanWITTMANN Battenfeld
SmartPower 210/1330 Unilog B8
Data mesin
- Nama mesin:
- Mesin acuan suntikan
- Pengeluar:
- WITTMANN Battenfeld
- Nombor mesin:
- 137949-100
- Tahun pembuatan:
- 2017
- Keadaan:
- sangat baik (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 1,437 h
Butiran teknikal
- Daya pencengkam:
- 2,100 kN
- Diameter skru:
- 65 mm
- Isipadu larian:
- 913 cm³
- Tekanan suntikan:
- 1,600 palang
- Berat keseluruhan:
- 10,500 kg
- Model pengawal:
- UNILOG B8
penyediaan
- Lokasi:
- Nordrhein-Westfalen, Jerman
– Jarak: lebih kurang 10,001 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
The machine was serviced by the manufacturer in 2021 and brought up to the current standard! The machine has not been used since and is therefore in very good condition!
The machine is offered including 2 Kistler modules for cavity pressure control!
TECHNICAL DETAILS
Material type: Thermoset
Clamping force: 2,100 kN
Screw diameter: 65 mm
Screw stroke: 275 mm
Screw L/D ratio: 22
Max. screw speed: 278 rpm
Screw torque: 1,920 Nm
Number of heating zones: 5
Clear tie bar spacing (HxV): 670 x 620 mm
Mould height installation: 350 mm
Platen spacing: 1100 mm
Opening stroke: 750 mm
Ejector stroke: 200 mm
Ejector force: 65 kN
Theoretical shot volume: 913 cm³
Specific injection pressure: 1,600 bar
Max. plasticising rate: 62 g/s
Nozzle travel/nozzle force: 400 mm / 100 kN
Free-flow injection rate: 419 cm³/s
Cylinder heating capacity: 27 kW
Number of heating zones incl. nozzle: 5
MACHINE DETAILS
Control type: UNILOG B8
Hydraulics
Hydraulic oil tank capacity: 600 litres
Min./max. oil temperature (HLP 32): 30 °C / 40 °C
Min./max. oil temperature (HLP 46): 40 °C / 50 °C
Switch-on temperature for oil cooling (HLP 32): 35 °C
Switch-on temperature for oil cooling (HLP 46): 45 °C
Electrical
Drive power hydraulic pump: 37 kW
Max. screw cylinder temperature: 350 °C
Cooling water system
Cooling water consumption: approx. 0.5 - 1.5 m³/h
Max. cooling water inflow: 35 °C
Cooling water return: max. 10 bar
Ambient temperature: °C
Noise level: 65 dB A
Weight: 10,500 kg
Operating hours: 1,437 h
EQUIPMENT
Kistler module for cavity pressure control zone 1: 20,000 pC
Kistler module for cavity pressure control zone 2: 10,000 pC
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A21223657
- Nombor rujukan:
- AUC-2602045
- Kemas kini:
- terakhir pada 20.02.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Vaterstetten KraussMaffei Technologies GmbHKM 160 / 750 PA G01
Koszalin KraussMaffei250-1400CX (225)
Breda FERROMATIK MILACRONeQ-280 - 2290
Wrocław Wittmann BattenfeldMacroPower 900/ 8800
Jerman PiovanDPM604
Heiligenhaus ABBIRB 2600 -20/1.65 IRC5
Heilbronn 
Jerman STORKS+6600 8650 rep
Wien Wittmann
Burgoberbach WITTMANNW832-0611
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.