Pusat pemesinan CNC 5-paksi menegakWenzler
VKM 1-1
Data mesin
- Nama mesin:
- Pusat pemesinan CNC 5-paksi menegak
- Pengeluar:
- Wenzler
- Model:
- VKM 1-1
- Tahun pembuatan:
- 2016
- Keadaan:
- terpakai
Harga & Lokasi
- harga:
- €115,000 (EXW)
- Permulaan lelongan:
- 12.06.2026 pada jam 09:00
- Tamat lelongan:
- 31.12.2026 pada jam 12:00
- Lokasi:
- 08 Plauen, Deutschland
Butiran teknikal
- Jarak gerakan paksi X:
- 1,500 mm
- Jarak perjalanan paksi-Y:
- 1,250 mm
- Jarak gerakan paksi Z:
- 880 mm
Butiran tawaran
- ID iklan:
- A22110478
- Nombor rujukan:
- M1154947
- Kemas kini:
- terakhir pada 12.06.2026
Penerangan
This machine was used as a showroom machine from 2016 to 2022. From 2022, the machine was used for production at HAL Plauen for the processing of axle carriers. Before being used for production, the machine was completely overhauled/refurbished.
In December 2024, a new milling spindle was purchased (the spindle has approximately 500 operating hours).
Machine operating hours: 24,000
Working area:
-> X-axis 1500 mm
-> Y-axis 1250 mm
-> Z-axis 880 mm
Feed rate / Rapid traverse:
-> X-axis 100 m/min
-> Y-, Z-axis 100 m/min
Axis acceleration:
-> X-, Y-axis 7 m/s²
-> Z-axis 10 m/s²
-> Jerk 150 m/s³
Table load capacity:
-> Max. weight 400 kg
Spindle:
-> Tool holder HSK 100
-> Speed range 10,000 rpm
-> Power (S6/40% duty) 40 kW
-> Max. torque 175 Nm
Tool magazine:
-> Positions 36
-> Max. tool length 520 mm
-> Max. tool diameter (with free adjacent slot) 205 mm
-> Max. tool weight 20 kg
-> Total load 200 kg
-> Tool change time 3 s
with chip conveyor and chiller/cooling unit
• Manufacturer: Lahntechnik GmbH
• Model: KESY 280-01
• Serial number: 2017-05981
• Year of manufacture: 2017
• Power rating: 13.6 kW
• Nominal voltage: 400 V / 3~ / PE / 50 Hz
• Control voltage: 24 V DC
• Protection class: IP 54
• Refrigerant: R410A – 10.03 t CO₂ equivalent
Giodozc Ekrspfx Amasu
• Max. operating pressure: 30 bar (HD) / 19 bar (ND)
• Empty weight: 400 kg
• Country of origin: Germany
The machine/asset does not include any product-related tools/fixtures or grippers (robots).
The machine was taken out of production in October 2025 due to the factory closure. It is still powered on and can be inspected in that state. However, it cannot be put into operation for a trial run because no machine operator is available. Please review the videos available, which were taken of the machine in December 2025.
Transport locks are not required.
For loading and unloading, special Wenzler lifting/transport equipment is required. This equipment must be rented directly from Wenzler/Heller Group by the buyer. After lifting and unloading, the buyer must return the equipment to Wenzler.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Didaftarkan sejak: 2011
75 Iklan dalam talian
Telefon & Faks
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.