Mesin penekan membranWemhöner
Vario Pin Basic 1000 plus
Mesin penekan membran
Wemhöner
Vario Pin Basic 1000 plus
Tahun pembuatan
2012
Keadaan
Terpakai
(berfungsi sepenuhnya)
Lokasi
Verl 

Data asas
- Nama mesin:
- Mesin penekan membran
- Pengeluar:
- Wemhöner
- Model:
- Vario Pin Basic 1000 plus
- Tahun pembuatan:
- 2012
- Keadaan:
- baik (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Harga & Lokasi
- Lokasi:
- Ostlandweg 7, 33415 Verl, Deutschland

Hubungi
Butiran teknikal
Dimensi dan berat
Berat keseluruhan:
18,000 kg
Jumlah panjang:
13,000 mm
Lebar keseluruhan:
4,600 mm
Jumlah ketinggian:
2,330 mm
Butiran kuasa
Voltan masuk:
400 V
Jenis arus masuk:
Penyaman udara
Dokumentasi dan pensijilan
Dokumentasi / manual
Penandaan CE
Maklumat lanjut
Kuasa:
55 kW (74.78 kuasa kuda)
Butiran tawaran
- ID iklan:
- A23301903
- Kemas kini:
- terakhir pada 10.11.2026
Penerangan
Membrane Press WEMHÖNER VARIOPRESS® –
Model BASIC Plus
Technical Data:
Press System: Hydraulic, single-daylight, upward-acting press with 2 tables, with automatic Vario-pin system and turning system.
Year of Construction: 2012
Press frame consists of a steel frame, which is screwed together to form a closed unit. Each frame is made from a single piece.
Dimensions of the heating plate: 2,800 x 1,500 mm
Height of the press chamber: 60 mm
Working height: approx. 950 mm
Opening width: max. 150 mm
Automatic membrane tension: Yes
Number of press cylinders: 6
Diameter of press plungers: Ø 125 mm
Design of the press tables: 2 tables with pin system, solid steel plates – top and bottom.
Max. loading or workpiece size: approx. 2,540 mm x 1,250 mm
Total press force: 2,400 kN
Installed power: 55 kW
Operating voltage: 400 V
Control voltage: 24 V
Brake voltage: 205 V
Frequency: 50 - 60 Hz
Electrical equipment: According to EN
Cutting station: Yes
Itsdpfx Ae Aid Etjdljp
Chamber pressure: max. 6 bar
Operating pressure of the hydraulic system: max. 320 bar
Required air pressure: min. 8 bar / approx. 80 Nl/
Multi-function frame: Yes – Wemhöner patent – Height of the multi-function frame 20 mm
2-daylight lifting system including support table
2 tray carriages with an aluminum plate. The aluminum plate consists of an aluminum sheet with grooves and channels for ventilation, as well as a support frame of 20 mm. Turning
Turning device – lateral
As soon as the tray reaches the position at the outlet of the press, the turning head rotates the entire workpiece mat by 180°. During the turning process, a vacuum system is activated to fix the door mat under the turning head. As soon as the turning head reaches the end position, the vacuum is switched off, and the doors can be trimmed by the operator in one step with a special knife.
- Robust, welded steel frame construction for supporting the machine elements
- Hydraulically controlled turning process
- Turning table with plastic cover
- Vacuum system for the turning table
- Turning process approx. 18 seconds
Electrical control:
Programmable controllers (PLC) of type SIEMENS Step 7 for the entire scope of supply. Control panel as a touch panel for the PLC control SIEMENS MP 277 with a 10-inch color monitor in the national language. Decentralized switching and control panel including wiring. Analog modem for monitoring the program sequence of the PLC controllers.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Model BASIC Plus
Technical Data:
Press System: Hydraulic, single-daylight, upward-acting press with 2 tables, with automatic Vario-pin system and turning system.
Year of Construction: 2012
Press frame consists of a steel frame, which is screwed together to form a closed unit. Each frame is made from a single piece.
Dimensions of the heating plate: 2,800 x 1,500 mm
Height of the press chamber: 60 mm
Working height: approx. 950 mm
Opening width: max. 150 mm
Automatic membrane tension: Yes
Number of press cylinders: 6
Diameter of press plungers: Ø 125 mm
Design of the press tables: 2 tables with pin system, solid steel plates – top and bottom.
Max. loading or workpiece size: approx. 2,540 mm x 1,250 mm
Total press force: 2,400 kN
Installed power: 55 kW
Operating voltage: 400 V
Control voltage: 24 V
Brake voltage: 205 V
Frequency: 50 - 60 Hz
Electrical equipment: According to EN
Cutting station: Yes
Itsdpfx Ae Aid Etjdljp
Chamber pressure: max. 6 bar
Operating pressure of the hydraulic system: max. 320 bar
Required air pressure: min. 8 bar / approx. 80 Nl/
Multi-function frame: Yes – Wemhöner patent – Height of the multi-function frame 20 mm
2-daylight lifting system including support table
2 tray carriages with an aluminum plate. The aluminum plate consists of an aluminum sheet with grooves and channels for ventilation, as well as a support frame of 20 mm. Turning
Turning device – lateral
As soon as the tray reaches the position at the outlet of the press, the turning head rotates the entire workpiece mat by 180°. During the turning process, a vacuum system is activated to fix the door mat under the turning head. As soon as the turning head reaches the end position, the vacuum is switched off, and the doors can be trimmed by the operator in one step with a special knife.
- Robust, welded steel frame construction for supporting the machine elements
- Hydraulically controlled turning process
- Turning table with plastic cover
- Vacuum system for the turning table
- Turning process approx. 18 seconds
Electrical control:
Programmable controllers (PLC) of type SIEMENS Step 7 for the entire scope of supply. Control panel as a touch panel for the PLC control SIEMENS MP 277 with a 10-inch color monitor in the national language. Decentralized switching and control panel including wiring. Analog modem for monitoring the program sequence of the PLC controllers.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2020
4 Iklan dalam talian
Hantar permintaan
Telefon & Faks
+49 5246 ... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Roreto
10,017 km
Pusat Pemesinan CNC - Perekat 5 Paksi
IMABIMA Cx40 E / R / 145 / 400
IMABIMA Cx40 E / R / 145 / 400
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Bad Oeynhausen
9,864 km
Penekan membran
FRIZMFP 15/27
FRIZMFP 15/27
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Cantù
9,903 km
Mesin penekan venir
ItalpresseUT/6
ItalpresseUT/6
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Kuchl
9,583 km
Sistem pengekstrakan mudah alih
FelderRL 160
FelderRL 160
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Jerman
9,624 km
Chuck - chuck 3 rahang - chuck kuasa
RöhmKFD-F-EC 400/3 (Nr.35)
RöhmKFD-F-EC 400/3 (Nr.35)
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Grońsko
9,365 km
Pusat pemesinan
HOLZ-HER7023 K
HOLZ-HER7023 K
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Jerman
9,854 km
Pengikat tepi
Holz -HerLUMINA 1380
Holz -HerLUMINA 1380
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Kežmarok
9,048 km
Penekan membran vakum
ItalpresseESTREMA 14,5-28
ItalpresseESTREMA 14,5-28
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Jerman
9,844 km
Pengepres vakum dengan 3 majalah paternoster WEMHÖNER Variopress - Basic 1000S (2018)
WEMHöNERVariopress - Basic 1000S
WEMHöNERVariopress - Basic 1000S
Iklan anda telah berjaya dipadamkan
Berlaku ralat












































































































