Weingartner Pick Up 400

Weingartner Pick Up 400

This 5-axis Weingartner Pick Up 400 machining center for screw manufacturing was manufactured in 2023. It features a maximum workpiece length of 4,000 mm and a maximum workpiece diameter for milling of 180 mm. The machine is equipped with a Siemens 840D control system and offers advanced simultaneous machining capabilities. If you are looking to get high-quality screw manufacturing capabilities, consider the Weingartner Pick Up 400 machine we have for sale. Contact us for further details.

• Control: Siemens 840D solution line (NCU 720.3), OP19 touchscreen + Siemens TP700 touch panel
• Simultaneous machining: 5-axis; B‑axis turning
• Workpiece capacity: max length between centers 4,000 mm; max diameter for milling 180 mm; chuck size Ø260 mm
• Power supply: 3 × 400 V / 50 Hz; main fuse approx. 200 AAxes
• X: travel 450 mm; rapid 20 m/min
• Y: travel −80 / +150 mm; rapid 20 m/min
• Z: rapid 25 m/min
• B: swivel range ±45°; max swivel speed 90°/s; clamping torque 5,000 Nm
• C: max speed 50 rpm; max torque 1,740 Nm (cont.) / 2,580 Nm (40% duty)
• W (tailstock slide): rapid 15 m/min
• VZ1 / VZ2 (steady rest slides): rapid 15 m/minTurning / Milling Unit
• Unit: UFE-400; tool spindle: MDFK
• Power: 45 kW (continuous) / 70 kW (40% duty)
• Max spindle speed: 14,000 rpm; nominal speed: 1,560 rpm
• Torque: 275 Nm (continuous) / 430 Nm (40% duty)
• Tool interface: HSK 100‑T (compatible HSK 100‑A / HSK 100‑T); additional interface: Capto C8
• Internal coolant: 80 bar; 20 l/minTailstock
• Hydraulically operated quill; diameter 190 mm; stroke 200 mm; Morse taper MK6Machine equipment / configuration
• Front and rear self-centering steady rests; independently CNC-positionable
• 2 prismatic steadies for screw milling
• Steady jaw ranges: 15–30 / 30–65 / 65–140 / 140–200 mm
• Hydraulic SMW KNCS‑N 260 power chuck with quick jaw change
Laodpfsz D Efhex Am Teg
• Central lubrication system
• Fully enclosed machine housing with driven safety doors; Visiport inspection windows
• Hydraulic and pneumatic systems
• Coolant and oil mist extraction preparation
• Electronic hand control for B/C/X/Y/Z axesSoftware / control functions
• Siemens Safety Integrated; Profibus / Profinet; OPC UA interface
• 5‑axis simultaneous machining; B‑axis turning; TRANSMIT / TRACYL
• Temperature compensation X/Y
• DNC remote diagnostics; WMDS Diagnostic System; Telediagnosis capability
• weinCAD EXTRUDER DESIGNER; WeinEXT – Praxis

Additional equipment

• Hinge-belt chip conveyor
• Coolant filtration system KF 200: 1,400 l tank; 40 µm filtration; high‑pressure pump 80 bar / 46 l/min; low‑pressure pump 13 bar / 160 l/min; automatic oil skimmer
• Oil mist extraction unit: airflow approx. 4,000 m³/h
• Operating platform with stairs and railing