Pelarik pusat

WEILER Werkzeugmaschinen GmbH Commodor

Good day,

We hereby offer, without obligation, a used lead and feed screw lathe from manufacturer Weiler.

Manufacturer: WEILER Werkzeugmaschinen GmbH
Model: Commodor
Year of manufacture: 1990
Machine No.: 2881

Spindle:
Spindle diameter at front bearing: 90 mm
Spindle bore: 56 mm
Internal taper: Morse 6
Faceplate diameter: 300 mm
Chuck diameter max.: 250 mm

Tool Slide:
Bed slide guide length: 380 mm
Handwheel drum on apron: 1 revolution = 25 mm
Graduation: 0.1 mm
Cross slide travel: 215 mm
Indexing ring graduation: 0.05 mm
Top slide travel: 115 mm
Indexing ring graduation: 0.05 mm
Height from tool support surface to center: 38 mm
Max. tool cross-section: 25 x 25 mm

Tailstock:
Quill travel: 150 mm
Quill diameter: 60 mm
Internal taper: Morse 4
Quill scale graduation: 1 mm
Handwheel drum graduation: 0.05 mm
Lateral movement: +/- 10 mm

Spindle speeds:
Single-speed motor: 50 – 2000 rpm
Pole-change motor: 25 – 2000 rpm
Main drive power: 4 kW
Operating voltage: 380 V, 50 Hz
Rated current: 9.5 A
Main fuse: 25 A

Feeds:
Number of feeds: 60
Longitudinal feed range: 0.026 – 0.888 mm/rev
Cross feed range: 0.013 – 0.444 mm/rev

Thread pitches:
Metric: 0.36 – 12 mm
Inch: 2 – 45 TPI
Module: 0.2 – 4 mod.
Diametral pitch: 5 – 90 D.P.
Leadscrew pitch, standard:
Metric: 6 mm
Inch: 4 TPI

Dimensions and weight:
Installation dimensions: 2350 x 1000 x 1400 mm (L x W x H)
Center height over floor: 1100 mm
Net transport weight: approx. 1500 kg

The following accessories are included with the machine:
- 3-jaw chuck
- Drill chuck with MT fitting
- Coolant system
- Work lamp
- Chip guard (rear wall)

Note:
The above technical data is taken from the operating manual, manufacturer brochures, or other sources. We cannot guarantee its completeness or accuracy.

Scope of delivery:
1 piece used leadscrew lathe Weiler Commodor

Application range and condition:
Pedpex Rcnlofx Agpjrf
The conventional lead and feed screw lathe was used sporadically for repair work and reproduction of spare parts for our own machinery in a company workshop. It is suitable as a compact, conventional lathe for company workshops, as a training machine in vocational schools, and as a backup machine. The lathe is fully functional, in good condition, and can be inspected under power in our workshop.

We would be pleased if this machine is of interest to you.

Your service team
Mertens & Frowein GmbH

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.