Pusat pemesinanWEEKE
VENTURE 5
Data mesin
Butiran teknikal
- Bilangan gandar:
- 4
- Model pengawal:
- POWERCONTROL PC85
- Lebar kerja:
- 1,220 mm
- Kelajuan gelendong penggilingan (maks.):
- 24,000 rpm
- Panjang kerja:
- 3,250 mm
penyediaan
- Lokasi:
- Piemonte, Itali
– Jarak: lebih kurang 10,024 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€1,500.00 (wajib)
percuma
Penerangan
TECHNICAL DETAILS
X-axis working range: 3,250 mm
Y-axis working range: 1,220 mm
Number of working zones: 2
Table system: Pod-and-rail table
Number of vacuum cup carriers: 6
Number of controlled axes: 4
Number of boring units: 1
Number of milling spindles: 1
Number of grooving units: 1
Boring unit
Position: top
Vertical boring spindles: 12
Horizontal boring spindles in X-direction: 4
Horizontal boring spindles in Y-direction: 2
Total number of boring spindles: 18
Milling spindle
Position: top
Controlled axes: 4
Motor power: 12 kW
Rotation speed: 24,000 rpm
Cooling: liquid cooling
Tool change: automatic
Grooving unit
Position: top
Design: fixed, for producing grooves in the X-direction
Maximum tool diameter: 100 mm
Motor power: 2.2 kW
Rotation speed: 7,500 rpm
Number of tool change positions: 16
Tool magazine at machining head: 8 positions
Tool magazine at rear of machine: 8 positions
MACHINE DETAILS
Control: POWERCONTROL PC85
Programming software: WOODWOP 5
Main spindle power: 12 kW
Total connected load: 22 kW
Vacuum pump capacity: 100 m³/h
EQUIPMENT
CE marking
Pod-and-rail worktable
6 vacuum cup carriers
Vacuum pump
Automatic tool change
2 tool magazines with 8 positions each
Safety device for machining units with safety sensors
Front safety mats
Liquid cooling for milling spindle
The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safety, and use of the machine at the destination.
External reference: 7716
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22363452
- Nombor rujukan:
- AUC-2607154
- Kemas kini:
- terakhir pada 20.07.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Itali BRANDTKDF 650
Sepanyol HOMAGEDGETEQ S-380 - OPTIMAT KDF650
Willroth WeekeBMG 111 VENTURE 108
Willroth HOMAGBOF 311
Itali BRANDTKDF 650
Lombardia BRANDTHIGHFLEX 1440
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.