Pusat pemesinanWeeke
Optimat BHC 280
Data mesin
- Nama mesin:
- Pusat pemesinan
- pengeluar:
- Weeke
- Model:
- Optimat BHC 280
- Nombor mesin:
- 0-250-04-2333
- tahun pembuatan:
- 2005
- Keadaan:
- sangat baik (terpakai)
- fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 5,800 h
Butiran teknikal
- Jarak gerakan paksi X:
- 3,310 mm
- Jarak perjalanan paksi-Y:
- 1,735 mm
- Jarak gerakan paksi Z:
- 220 mm
penyediaan
- Lokasi:
- Warmińsko-Mazurskie, Poland
– Jarak: lebih kurang 9,157 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€1,500.00 (wajib)
percuma
Penerangan
Control system: WoodWOP 5.0
Table length: 2750 mm
Table width: 1050 mm
Workpiece thickness: 100 mm
X-axis: 3310 mm
Y-axis: 1735 mm
Z-axis: 220 mm
Tool holder: HSK-F 63
Magazine: 8-fold plate
Unit: 2 spindles
Drill: 6+4 x 32
X-axis speed: 60 m/min
Y-axis speed: 50 m/min
Z-axis speed: 20 m/min
Standard compressed air quality: according to ISO 8573-1 quality class 3
Connection: R 1/2"
Pressure in the supply line: 7 bar
Compressed air consumption: approx. 100-200 l/min
Suction connection: Ø 200 mm
Height: 2110 mm
Total extraction capacity: min. 3170 m³/h
Air speed: min. 28 m/s
Pressure loss: min. 2000 Pa
MACHINE DETAILS
Loading dimensions: 5400 x 2300 x 2400 mm
Protection class: IP53
Operating voltage: 3 x 400 Volt, ±5%
Frequency: 50 Hz
External power supply: 32 A
Recommended fuse: 35 A
Total connected load approx.: 17.5 kW
FUNDAMENT
Surface pressure: in the area of the support points 1.2 N/mm²
Floor covering: Concrete quality B25, compressive strength ≥ 200 mm
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
DOKUMEN
17006221.pdf (PDF)17006221-2.pdf (PDF)
Pemprosesan pembayaran
- kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
pemindahan bank
Butiran tawaran
- ID iklan:
- A17006221
- Nombor rujukan:
- AUC-2409010
- kemas kini:
- terakhir pada 06.09.2024
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Sepanyol WEEKEOPTIMAT BHC VENTURE 05M
Jerman WeekeOptimat BHC 550
128, K. Kryla 1, Sadová, 612 00 Brno-Brno-Královo Pole, Česko WeekeOptimat BHC Venture 08M
Diepenau Homag Weeke Homag BohrsystemeWeeke Optimat BHC Venture 08M
Austria WeekeOPTIMAT BHC 550
Itali WEEKEBHC 500
Jerman WeekeOptimat BHX 500/D
Ammerbuch WeekeBHC 200
Itali WEEKEBHC VENTURE 08M
Amerika Syarikat WEEKEOPTIMAT ABD060/12/NA
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.