Unit sandblastingTurbotechnika
DELTA 250 GR 7/10

Data mesin
- Nama mesin:
- Unit sandblasting
- Pengeluar:
- Turbotechnika
- Model:
- DELTA 250 GR 7/10
- Nombor mesin:
- 936
- Tahun pembuatan:
- 2008
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 2,288 h
Butiran teknikal
- Berat kepingan kerja (maks.):
- 150 kg
- Kuasa:
- 8 kW (10.88 kuasa kuda)
- Panjang benda kerja (maksimum):
- 800 mm
- Lebar benda kerja (maks.):
- 600 mm
- Bilangan lengan sokongan:
- 16
penyediaan
- Lokasi:
- Solothurn, Switzerland
– Jarak: lebih kurang 10,010 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- EXW
percuma
Penerangan
No minimum price - guaranteed sale to the highest bidder!
The machine is equipped with an optional support system and can therefore accommodate a large workpiece or a maximum of 16 smaller workpieces on the supports.
TECHNICAL DETAILS
Turbine Power: 8 kW
Workpiece Size (single workpiece) max.: 800 x 600 mm
Workpiece Weight (single workpiece) max.: approx. 100 kg
Number of Positions, Support System: 16
Workpiece Size (on support system) max.: 200 x 200 mm
Workpiece Weight (on support system) total max.: 150 kg
Filter Data
Number of Filter Cartridges: 2
Total Filter Area: 20 m²
Filter Area per Filter Cartridge: 10 m²
Air Velocity: 1.25 m/min
Compressed Air Data
Compressed Air Pressure: max. 4-5 bar
Compressed Air Consumption: approx. 7 m³/h
Compressed Air Connection: G 1"
Permissible Vacuum: max. 1,500 Pa
Dust Collector: 20 l
Residual Dust Content in Exhaust Air: below 5 mg/m³
MACHINE DETAILS
Control Impulse/Time: 24 V, 1 phase, 50 Hz
Solenoid Valves Voltage: 24 V, 50 Hz
Timer Input/Output Voltage: 24 V, 50 Hz
Operating Hours: 2,288 h
Fan Data
Air Flow Rate: 2,000 m³/h
Static Pressure: 1,800 Pa
Total Pressure: 2,000 Pa
Power Consumption: 2.2 kW
Motor Power: 1.1 kW
Motor Voltage: 400 V
Motor Frequency: 50 Hz
Motor Phases: 3 phases
EQUIPMENT
Filter cartridges with 10 m² filter area each
Aluminum venturi tubes
Solenoid valves, type CA 25 DD
Timer CG 03.06/04
Filter group
Pressure regulator
Pressure gauge
1" ball valve
Dust collector, 20 l
Fan
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22244502
- Nombor rujukan:
- AUC-2606279
- Kemas kini:
- terakhir pada 01.07.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Neubrandenburg RöslerST 1400 PS
Hungary OMSGCAPRI 9/13 M
Jerman Gläsner
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.






































































