Mesin menumbuk dan menggigitTRUMPF
TruPunch 5000
Data mesin
- Nama mesin:
- Mesin menumbuk dan menggigit
- Pengeluar:
- TRUMPF
- Model:
- TruPunch 5000
- Tahun pembuatan:
- 2010
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 57,504 h
Butiran teknikal
- Kuasa menebuk:
- 22 t
- Ketebalan lembaran (maks.):
- 8 mm
- Jarak gerakan paksi X:
- 2,500 mm
- Jarak perjalanan paksi-Y:
- 1,250 mm
penyediaan
- Lokasi:
- Rheinland-Pfalz, Jerman
– Jarak: lebih kurang 9,956 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€5,000.00 (wajib)
percuma
Penerangan
AUTOMATION
- SheetMaster - Loading and unloading in parallel with main time
- Toolmaster 70 - Set-up during machining
- GripMaster with scissor lift table
- Good part conveyor
TECHNICAL DETAILS
Travels X / Y: 2500 / 1250 mm
Sheet thickness: 8 mm
Punching force: 220 kN
Active hold-down force: 4.5 - 20 kN
Workpiece weight: 200 kg
Control: Siemens Sinumerik 840D
parts flap: 500 x 500 mm
Speed X / Y / simultaneous: 100 / 60 / 116 m/min
C-axis: 500 rpm
Stroke sequence punching / marking: 1600 / 3000 1/min
Position deviation Pa: ±0.1 mm
Positional scatter Ps: ±0.03 mm
Linear magazine: 21 tools with 3 clamps
Tool change time single tool / multitool: 3 / 0.3 s
MACHINE DETAILS
Space requirement: 6,760 x 6,100 mm
average power consumption: 9.5 kW
Operating hours: 57,504 h
EQUIPMENT
- Stable, easily accessible C-frame
- Moving ball roller tables
- Linear magazine for tool stations and clamping claws
- Foot switch for closing the claws
- Good parts container
- Hydraulic single tool holder, 360° rotation
- Manually adjustable hold-down force
- Programmable hold-down device - active/passive/follow-up
- Spray lubrication stamp
- punch slug extraction
- Level monitoring thread forming and tool lubrication
- CE marking
- Multi-beam light barriers
- Quick shutdown hydraulics
- bulge detection
ADDITIONAL EQUIPMENT
- MultiTool function
- MultiBend function
- Thread forming function
- Function roller technology
- Signing
- Multishear
- Adaptive stroke calibration
- Active matrix
- follow-up cylinder
- Spray lubrication die with level monitoring
- follow-up cylinder
- Sensor for parts chute
- Vibration-damped installation
- Chip conveyor with tipping container
- Blow-out device for small parts
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A18456496
- Nombor rujukan:
- AUC-2502010
- Kemas kini:
- terakhir pada 07.02.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Slovakia TRUMPFTRUPUNCH 5000 S10
Mudersbach BernardoAKPL 1600 x 40
Birmingham MullerH Frame
Rosmalen BIESSERover A3.40 FT NBC 412 Aut. nesting cell
Rödermark OMCCAHSI 3000 x 4
Birmingham Trumpf500R 1600
Trittau Hochstrate3000 x 5 mm
Iserlohn JUNGENTHALDK 1400
Mouscron LVDMVSB 62/16
Schmölln WEINGARTENXRR III sp
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.