Mesin pemotong laserTrumpf
TruLaser Cell 8030
Data mesin
- Nama mesin:
- Mesin pemotong laser
- Pengeluar:
- Trumpf
- Model:
- TruLaser Cell 8030
- Tahun pembuatan:
- 2013
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 94,936 h
Butiran teknikal
- Pengeluar pengawal:
- Siemens SINUMERIK 80 D
- Jarak gerakan paksi X:
- 3,000 mm
- Jarak perjalanan paksi-Y:
- 1,300 mm
- Jarak gerakan paksi Z:
- 600 mm
- Kadar suapan paksi-X:
- 100 m/min
penyediaan
- Lokasi:
- Hessen, Jerman
– Jarak: lebih kurang 9,822 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- EXW
percuma
Penerangan
No minimum price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Work area
X-axis: 3,000 mm
Y-axis: 1,300 mm
Z-axis: 600 mm
B-axis: ±135°
C-axis: n × 360°
Speeds
X / Y / Z-axis: 100 m/min
B / C-axis: 540 °/s
Acceleration
Simultaneous: 17.3 m/s²
X / Y / Z-axis: 10 m/s²
B / C-axis: 200 | 100 rad/s²
Maximum positioning accuracy
Linear axes X / Y / Z: 0.03 mm
Rotary axes B / C: 0.005°
Maximum positioning deviation
Linear axes X / Y / Z: 0.08 mm
Rotary axes B / C: 0.015°
MACHINE DETAILS
Laser type: Solid-state laser TruDisk 3001
Laser power: 3,000 W
Cutting gas: Nitrogen
Control: Siemens SINUMERIK 80 D
Operating hours
"Laser On" hours: 94,936 h
Operating hours: 99,293 h
EQUIPMENT
Magnetic coupling
Dynamic cutting optics with f = 150 mm
FocusLine
FastLine Cell
ObserveLine
Rotary changer D = 4,000 mm including rear protection
Scrap conveyor
4× configurable control interface
Valve terminal for 8 pneumatic clamps per side
2× loading status indicators for rotary changer
Extended compressed air supply on mounting sheet including vacuum ejectors
Cutting gas compressed air
Renishaw probe
Measuring head (without probe)
Measurement data processing
3× horizontal fixture interface
Exhaust ducting
Protective cabin for rotary changer including safety device, 1 window and column for console
Status lights top & bot
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A20685450
- Nombor rujukan:
- AUC-2512038
- Kemas kini:
- terakhir pada 05.12.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Val-au-Perche TRUMPFTruLaser Cell 8030 L60
Saerbeck DURMAAD-S 30320
Val-au-Perche TRUMPFTruLaser Cell 8030 L60
Łódź TRUMPFTruLaser Cell 8030
Veghel BKRS Portaalkraan Gantry CraneDPL-29-2x20
Sittard MaedaMC 285CWMB-3 | 2021
Wiefelstede DONAUDR30
Bühl MENGELEH 160-3
Gretzenbach Mercedes-Benz1428 AF 4x4
Dn10 4Es Balpe
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.