Mesin pemotong laser 5 paksiTRUMPF
TLC Cut 5
Data mesin
- Nama mesin:
- Mesin pemotong laser 5 paksi
- Pengeluar:
- TRUMPF
- Model:
- TLC Cut 5
- Tahun pembuatan:
- 2006
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 59,480 h
Butiran teknikal
- Kuasa laser:
- 3,200 W
- Jarak gerakan paksi X:
- 3,000 mm
- Jarak perjalanan paksi-Y:
- 1,500 mm
- Jarak gerakan paksi Z:
- 600 mm
- Sudut putar paksi B (maks.):
- 100 °
- Sudut putar paksi C (maks.):
- 360 °
penyediaan
- Lokasi:
- England, Britain Raya
– Jarak: lebih kurang 10,575 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
No reserve price – guaranteed sale to the highest bidder!
Predecessor model of the well-known TruLaser Cell series
TECHNICAL DETAILS
Category: 5-axis 3D laser cutting system
Condition: Fully serviced (twice yearly by Trumpf UK)
Last maintenance: January 2019
New vacuum pump installed: 28/05/2019
Working area
X axis: 3,000 mm
Y axis: 1,500 mm
Z axis: 600 mm
B axis (rotary axis): +100°
C axis (rotary axis): n x 360°
Laser source
Model: TRUMPF TLF 3200 Turbo
Laser power: 3.2 kW
Pilot laser: Present (for programming support)
Control & software
CNC control: Siemens 840D with 3.5" floppy disk drive
Network connection: Available (including analog modem for remote maintenance)
Software: ToPs 100 with nesting module & IGES translator + ToPs 800 with fixture design & 3D IGES translator
MACHINE DETAILS
Beam on time: 14,922 h
Laser on time: 59,480 h
Dimensions: 3.0 x 1.5 x 0.6 m
EQUIPMENT
- Logbook function for laser power monitoring
- Power supply cabinets
- Closed water cooling system with air circuit
- 5" high-pressure cutting optics
- Setup fixture
- Laser safety housing, class 1, with manual sliding door
- Extraction unit with particle filter (2,000 m³/h)
- Stationary worktable
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A20509990
- Nombor rujukan:
- AUC-2511106
- Kemas kini:
- terakhir pada 12.11.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Britain Raya TrumpfTLC CUT 5
Agios Athanasios SGPPEZZ 500/1700/1000
Veghel Wattsan6090 LT
Balaguer BeyelerPR4
Homburg TRUMPFTruLaser 5060 Co2 / 6kW
Ennepetal HS-MaschinenMS 4000 + MR 58
Plettenberg HELMERDINGERL 150 B
Doxato/Drama WEINGARTEN
Su Zhou Shi EQ AutomationBD89NC2A1S
Möglingen TRUMPFTruLaser Robot 5020 LW01 4000 Watt
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.