Mesin penggerek mejaTOS Varnsdorf
WFQ 80CNC/50
Data mesin
- Nama mesin:
- Mesin penggerek meja
- Pengeluar:
- TOS Varnsdorf
- Model:
- WFQ 80CNC/50
- Tahun pembuatan:
- 1990
- Keadaan:
- sangat baik (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Jarak gerakan paksi X:
- 1,600 mm
- Jarak perjalanan paksi-Y:
- 920 mm
- Jarak gerakan paksi Z:
- 950 mm
- Diameter gelendong:
- 128 mm
- Model pengawal:
- HEIDENHAIN iTNC530
penyediaan
- Lokasi:
- Ústecký kraj, Republik Czech
– Jarak: lebih kurang 9,469 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€2,000.00 (wajib)
percuma
Penerangan
The machine was overhauled and modernised in 2005. Repairs were carried out in 2025. The following work was completed:
Cleaning of the machine
Overhaul and adjustment of the machine geometry
Overhaul of machine functions
Overhaul of the electrical equipment
Overhaul of hydraulics and lubrication
Backlash compensation and drive optimisation
Replacement of slideway wipers
Repair of telescopic covers
Overhaul of tool cooling system CHOV-K 10 bar
Overhaul of tool changer AVN40
TECHNICAL DETAILS
Main spindle diameter: 128.57 mm
Tool holder: 50 ISO
Spindle speed range: 5,000 rpm
X-axis travel: 1,600 mm
Y-axis travel: 920 mm
Z-axis travel: 950 mm
Table clamping surface: 850 x 850 mm (850 x 1,600 mm, including additional support)
Table load capacity: 3,000 kg
MACHINE DETAILS
Control: HEIDENHAIN iTNC530
EQUIPMENT
Handwheel
SIEMENS motors and drives
CNC table - full B-axis control
CHOV-K 10 bar - cooling through the spindle axis – emulsion
ATC40 - automatic tool changer
Operator panel protected against chips and water
Workpiece cover
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A21761343
- Nombor rujukan:
- AUC-2604139
- Kemas kini:
- terakhir pada 21.04.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Ústecký kraj TOS VarnsdorfWH10-CNC/18
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.