Treler separa dengan walking floor
STAS 13.50 "ECOhddisc93" 92,5m³

Harga tetap ditambah cukai perkhidmatan
€22,680
Keadaan
Terpakai
Lokasi
Korschenbroich-Glehn Jerman
Treler separa dengan walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Treler separa dengan walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Treler separa dengan walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Treler separa dengan walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Treler separa dengan walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Treler separa dengan walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Treler separa dengan walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Treler separa dengan walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Treler separa dengan walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Treler separa dengan walking floor STAS 13.50 "ECOhddisc93"   92,5m³
more Images
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50

Data asas

Harga & Lokasi

Harga tetap ditambah cukai perkhidmatan
€22,680
Lokasi penjual:
Dieselstr. 9, 41352 Korschenbroich-Glehn, Jerman Jerman
Hubungi

Butiran teknikal

Dimensi dan berat

Isipadu ruang muatan:
93 m³
Panjang ruang kargo:
13,535 mm
Lebar ruang kargo:
2,480 mm
Ketinggian ruang muatan:
2,825 mm

Gandar dan roda

Konfigurasi gandar:
3 gandar

Maklumat lanjut

Pendaftaran pertama:
12/2018

Butiran tawaran

ID iklan:
A23344004
Nombor rujukan:
4430
Kemas kini:
terakhir pada 17.11.2026

Penerangan

Chassis: Reinforced, continuous chassis design, new.
Superstructure: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength, 140 mm high reinforced cross members (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (trailer construction max. 39,000 kg).

Axles and Suspension: "Disc brake 22.5"
Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BVA) readable in the control unit (display), 1st axle can be lifted with starting aid (new EC regulation, without control unit option).

Tires and Wheels:
6 wheels with tires size 385/65 R 22.5, approx. 50-60% tread, on Alcoa DuraBright rims? 11.75x22.5 ET 120
Hnode Akp Rfspfx Aixjw

Kingpin:
2" bolted into a 10 mm thick plate.

Landing Gears:
Mechanical landing gears with two speeds, 2x 20 tons support load with swivel foot.

Braking System:
According to EC standard, EBS E-system Wabco with RSS system (Roll Stability Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system.

Electrical System:
According to the guidelines of the EC standard 91/633 and 97/28 with 6 LED three-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels at the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile, 2 separate LED reversing lights on the side approx. at landing gear height.

Superstructure/Body: "Body fully welded inside", reinforced side walls.
Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn, aluminum body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system on 140 mm ALU cross members, floor load approx. 9 tons/m2, cross members mounted close together (approx. 350mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 rotary latch locks, mounted in the welded aluminum rear frame on Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, moving remainder unloading wall with Kevlar sheet approx. 1,800 mm long plus side Kevlar sheet sealing, aluminum wear plates on the side and rear approx. 2,000x1,500x4mm.

Hydraulic System: "Cargo - Floor" Sliding Floor System
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lift slide bearings, type CF, 10 mm floor, ribbed design, hydraulics with approx. 200 mm working stroke, fixed points type "Faster" with high hydraulic locks mounted on the front wall, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left with remote control integrated in a lockable, waterproof box, wear corners at the rear of the floor end.

Accessories:
6 PVC mudguards with

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.

Pembekal

Didaftarkan sejak: 2002

18 Iklan dalam talian

Hubungi

Hantar permintaan

Tanahus 
Jerman
Austria
Switzerland
Amerika Syarikat
United Kingdom
Perancis
Belgium
Sepanyol
Meksiko
Itali
Belanda
Poland
Persekutuan Rusia
Belarus (Republik Belarus)
Ukraina
Estonia
Turki
New Zealand
Ireland
Republik Czech
Denmark
Finland
Sweden
Norweg
Luksemburg
Yunani
Lithuania
Latvia
Iceland
Portugal
Brazil
Venezuela
Argentina
Hungary
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Kroasia
Bulgaria
Makedonia Utara
Bosnia dan Herzegovina
Israel
Mesir
Maghribi
India
Indonesia
Korea Selatan
Jepun
Thailand
Malaysia
Vietnam
China, Republik Rakyat
Taiwan
Iran
Bangladesh
Nota: Permintaan anda akan dihantar kepada semua penjual dalam kategori mesin. Dengan cara ini, anda boleh menerima banyak tawaran.
Permintaan tidak dapat dihantar. Sila cuba lagi kemudian.

Telefon & Faks

+49 2182 ... iklan