Pengering cip kayuSPE Renergi
Pengering cip kayu
SPE Renergi
harga tetap ditambah cukai perkhidmatan
€20,000
Keadaan
Terpakai
Lokasi
Cēsis 

Data mesin
Harga & Lokasi
harga tetap ditambah cukai perkhidmatan
€20,000
- Lokasi:
- Valmieras iela 20A, LV4101 Cesis, LV

Hubungi
Butiran tawaran
- ID iklan:
- A19296676
- Kemas kini:
- terakhir pada 03.12.2025
Penerangan
SPE Renergi Low Temperature Dryer.
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur.
Power supply Data:
Gijdswp Rqfepfx Aqust
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price:20,000.00 EUR (VAT is not included)
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur.
Power supply Data:
Gijdswp Rqfepfx Aqust
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price:20,000.00 EUR (VAT is not included)
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Didaftarkan sejak: 2022
2 Iklan dalam talian
Hantar permintaan
Telefon & Faks
+371 27 3... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Iklan kecil
Warburg
9,851 km
Loji pembalut
Haver&BoeckerAbfüllanlage Rotopacker
Haver&BoeckerAbfüllanlage Rotopacker
Iklan kecil
Essen
9,995 km
Dandang wap
BAYHDK7000
BAYHDK7000
Iklan kecil
Jerman
9,760 km
Robot industri
Kuka KUKAKR6 + KR16 mit KRC2ed05
Kuka KUKAKR6 + KR16 mit KRC2ed05
Iklan kecil
Bergatreute
9,837 km
Pencincang kayu
VecoplanVAZ 2500
VecoplanVAZ 2500
Iklan kecil
Zheng Zhou Shi
3,586 km
Peralatan menghancurkan
MINGYUAN Double rotor hammer crusherDouble stage hammer crusher
MINGYUAN Double rotor hammer crusherDouble stage hammer crusher
Iklan kecil
Szentendre
9,141 km
Silo simpanan dari logam
Holtrop & Jansma
Holtrop & Jansma
Iklan kecil
Jakling
9,459 km
Pusat pemusingan dan pengilangan CNC
EMCOHyperturn 665 MC Plus
EMCOHyperturn 665 MC Plus
Iklan kecil
Kanzach
9,849 km
Sistem pemotongan silang pengoptimuman
Paul14 E, KE oder MKL
Paul14 E, KE oder MKL
Iklan kecil
Bielefeld
9,878 km
Cutter cut expert ecocam 2 / Plotter
expert international gmbhcut expert ecocam 2
expert international gmbhcut expert ecocam 2
Iklan kecil
México
15,952 km
Mesin Pemotong Laser Jimat
BodorA3 1500W
BodorA3 1500W
Iklan anda telah berjaya dipadamkan
Berlaku ralat










































































