Mesin penamat getaranSPALECK
Z4
Data mesin
- Nama mesin:
- Mesin penamat getaran
- Pengeluar:
- SPALECK
- Model:
- Z4
- Tahun pembuatan:
- 2024
- Keadaan:
- hampir baru (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Harga & Lokasi
- Lokasi:
- Donaueschingen, Jerman
Butiran teknikal
- Jumlah ketinggian:
- 1,250 mm
- Berat keseluruhan:
- 1,000 kg
- Jumlah panjang:
- 1,870 mm
- Lebar keseluruhan:
- 740 mm
- Jenis arus masuk:
- tiga fasa
- Kapasiti tangki:
- 30 l
- Kapasiti tangki yang boleh digunakan:
- 20 l
- Voltan masuk:
- 400 V
- Kuasa:
- 3.6 kW (4.89 kuasa kuda)
Butiran tawaran
- ID iklan:
- A22005983
- Kemas kini:
- terakhir pada 27.05.2026
Penerangan
The system is suitable for deburring, edge rounding, cleaning, smoothing, polishing, and burnishing of small to medium-sized workpieces. The centrifugal technology enables intensive processing with short cycle times. The machine is particularly suitable for series production, metal processing, stamped parts, turned parts, milled parts, and smaller precision components.
The system is offered including a pneumatic unit and control cabinet. The Z4 features an integrated separation system for separating workpieces and grinding media, as well as a continuously variable speed adjustment of the rotating table via a frequency inverter.
Technical data according to the manufacturer's data sheet Z4:
Manufacturer: probably Spaleck Oberflächentechnik
Model: Z4
Machine type: Centrifugal finishing system / vibratory finishing system
Nominal volume of the working container: 30 l
Usable volume of the working container: 20 l
Operating voltage: 400 V / 50 Hz
Connected power: 3.6 kW
Max. speed of the rotating table: 280 rpm
Ring gap width: ≥ 0.4 mm
Tilting angle: 150°
Space requirement: approx. 1.4 m²
Width of the system: 740 mm
Length of the system: 1,870 mm
Height to the top edge of the system: 1,250 mm
Length of the separation section: 855 mm
Equipment:
Centrifugal finishing system Z4
Integrated separation system
Pneumatic unit
Separation section / discharge
Control cabinet
Gsdpfxey Uwh Uo Abnoiw
Frequency inverter for stepless speed adjustment
Working container with wear-resistant PU lining
Suitable for wet machining / vibratory finishing processes
Condition: Like new, used for only a few hours.
Terms of sale:
Sale exclusively to commercial businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with exclusion of any warranty/liability for defects. No guarantee is given. Errors and prior sale excepted.
Inspection possible by appointment.
Sale is ex works.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Hantar permintaan
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.