SincoTec Mesin Ujian Resonans Power Swingly 20 kN EXCITING MOT

SincoTec SincoTec

SincoTec

Type: Exciting Mot

Resonance test bench POWER SWINGLY 20 kN

The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator.
It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor.
The vibration head is located in the upper part of the machine and generates the dynamic amplitude.
The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally.
The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive.

The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse.
The control of the test bench is carried out by the EXCITING MOT control system.
The complete control electronics for the control system are housed in an industrial PC cabinet.
The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529.

Technical data:

General data of the test bench:

Overall height of the test bench 1840 to 2240 mm
Height of the machine table 1030 mm
Width of the test bench 800 mm
Depth of the test bench 1500 mm
Height of the test chamber max. 600 mm (without force sensor)
Free column passage 550 mm
Maximum force amplitude 10000 N
Maximum total force ±20000 N
Maximum stroke ±5 mm
Test frequency 30 to 110 Hz
Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3)
Weight of the test bench approx. 1880 kg
Max. weight of the clamping device 150 kg

General data of the control cabinet:

Overall height of the control cabinet 1900 mm
Height of the table top 1080 mm
Width of the control cabinet 650 mm
Depth of the control cabinet 700 mm
Weight of the control cabinet 152 kg
Color RAI 9006 (white aluminum), table top Midnight

Conditions for the installation site:

Space requirement 2.5 x 2.5 m
Required ceiling height 2.8 m
Floor load-bearing capacity 170 N/cm²
Voltage supply 400 V / 50 Hz (right-rotating field)
Connection plug CEE socket, 5-pole, 16 A
Fuse 16 A

Connection and environmental conditions

Mains conditions:

Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field
Voltage fluctuations < ± 10%
Short-time voltage dips < 20 ms

Gedpfszii Awox Alteuh
Limits for permanent interference Radio interference level A according to VDE0871
Frequency 50 Hz ± 1%
Protective earth Ground resistance < 0.3 Ω

Model: POWER SWINGLY MOT

Condition: used

Scope of supply: (See picture)

(Changes and errors in the technical data are subject to change!)

We will be happy to answer any further questions you may have by telephone.

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.