Treler tipper tiga hala

Schwarzmüller Tandem-Kippanhänger bündig, Plane

Towing device
Cranked drawbar with height-adjustable heavy-duty screw-type towing eye, 50 mm

Wheels
4 pcs 385/65 R 22.5, 160J tyres, brand at manufacturer's discretion (construction site tread)
4 pcs Alcoa aluminium rims 11.75 x 22.5, offset-free, DuraBright EVO, polished finish
Without spare tyre
Without spare rim(s)
Without wheel nut caps

Brake system / Suspension
Brake system according to ECE Regulation R13
Dual-line pneumatic brake system
Knorr-brand brake system
EBS system 2S2M, 2nd axle sensed
RSS/RSP - Stability program
Spring-actuated parking brake on 2nd axle
Aluminium air tanks
Brake/air connection lines with Duomatic quick couplings
EBS/ABS connection cable
Hose lines routed under the drawbar
Electronic air suspension with automatic lowering device via inductive switch and additional lowering lock-out via rotary switch on the trailer
Ibedpfxowuf A He Abyjc
Without lift/lowering device

Tipping body
Steel welded construction
Fixed steel front wall, 4 mm, approx. 980 mm high
2 pcs internal and 1 pc external access step on front wall
Special fine-grain steel floor plate, 5 mm
(Slight floor corrugation possible due to welding distortion)
5 pairs of heavy-duty swing-up lashing rings, 5 t (distance between lashing rings approx. 2,320 mm)
One-piece reinforced aluminium hollow profile side walls 60/40 mm, approx. 980 mm high, foldable with extended swivel toggle locks and spring lifting aid, also pivot-mounted
Side walls left and right with manual central locking
2 pcs rear corner posts at side wall height, fixed-mounted
Steel rear wall, 4 mm (HB400), approx. 980 mm high, pivot-mounted with recessed mounting, hooks for dosing chains on rear wall and underside of body
Rear wall lock = automatic pneumatic locking
With sealing strips

Tarpaulin
Plastic roll tarp incl. aluminium tube with hand crank, side overhang approx. 400 mm, without customs lock, horizontal lashing cord on right side in driving direction, zig-zag lashing at front and rear; retaining bracket and locking for rolled-up tarp on right side in driving direction; holder for hand crank
Tarpaulin fastening on left side in driving direction with 2 pcs tension belts incl. rubber pads and tension locks mounted on underside of body
Tarpaulin colour similar to RAL 9006 White Aluminium

Lighting / Electrical
24-volt lighting system according to ECE Regulation R48
2 pcs Aspöck full LED multi-chamber tail lights with integrated control unit
2 pcs LED front position lights
2 pcs LED rear outline marker lights
Flashing LED side marker lights, activated via indicator signal
2 pcs LED license plate lights
1 pc fixed electrical connection cable with 15-pin plug, routed under the drawbar
2 additional LED reversing lights and
2 LED reversing lights mounted laterally, approx. centre rear

Paintwork
Steel shot blasting, multi-layer epoxy zinc phosphate primer and spray painting with 2-component polyurethane top coat
Chassis = RAL 7021 Black Grey
Tipping body incl. front wall = RAL 2011 Deep Orange
Side walls = RAL 2011 Deep Orange
Rear corner posts = RAL 2011 Deep Orange
Rear wall = RAL 2011 Deep Orange
Wheel hubs black = powder-coated
Support legs black = powder-coated
Side underrun protection = manufacturer's choice
Plastic parts black, unpainted
Powder-coated attachment/mounting parts in black
Hot-dip galvanized attachment/mounting parts, unpainted

Subject to errors and modifications.

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.