Mesin pengimbang mendatar untuk rotorSCHENK
H4U
Mesin pengimbang mendatar untuk rotor
SCHENK
H4U
Keadaan
Terpakai
Lokasi
Jerman 

Gambar menunjukkan
Tunjukkan peta
Data mesin
Harga & Lokasi
- Lokasi:
- , Jerman
Hubungi
Butiran tawaran
- ID iklan:
- A17805726
- Nombor rujukan:
- 1087-0100581
- kemas kini:
- terakhir pada 09.04.2025
Penerangan
Technical details:
balancing body max.: 800 kg
balancing body diameter: 1250 mm
Balancing revolution per minute: 190 - 3600 U/min
bed length: 2600 mm
voltage: 380 V/Hz
drive power: 7,5 kw
Weight approx.: 1,5 t
dimension machine xH: 3,5 x 1,7 x 2,0 m
dimensions electric cabinet: B:650 x T:250xH:800 mm
Horizontal balancing machine
The balancing machine is used to measure and balance the static or dynamic unbalance of rotors.
Balancing body weight max. 800 kg with equal load distribution, i.e. 400 kg per bearing pedestal
Power transmission by means of cardan shaft
Iodpfx Aou Upp Tjbyetn
Bearing journal Ø min./max.: 16-95 / 95-180 mm
Bearing distance center distance min. 125 mm and shaft end bearing center max. 2070 mm
Measured speed:
1st gear = 190 - 650 rpm.
2nd gear = 400 - 1250 rpm
3rd gear = 700 - 2100 rpm.
4th gear = 1200 - 3600 rpm.
2 pick-up blocks whose displacement is manual over the entire bed
Schenk measuring device with digital display
and some accessories, e.g. many rotor shafts with different Ø and different rotor mounts, please ask!
*
balancing body max.: 800 kg
balancing body diameter: 1250 mm
Balancing revolution per minute: 190 - 3600 U/min
bed length: 2600 mm
voltage: 380 V/Hz
drive power: 7,5 kw
Weight approx.: 1,5 t
dimension machine xH: 3,5 x 1,7 x 2,0 m
dimensions electric cabinet: B:650 x T:250xH:800 mm
Horizontal balancing machine
The balancing machine is used to measure and balance the static or dynamic unbalance of rotors.
Balancing body weight max. 800 kg with equal load distribution, i.e. 400 kg per bearing pedestal
Power transmission by means of cardan shaft
Iodpfx Aou Upp Tjbyetn
Bearing journal Ø min./max.: 16-95 / 95-180 mm
Bearing distance center distance min. 125 mm and shaft end bearing center max. 2070 mm
Measured speed:
1st gear = 190 - 650 rpm.
2nd gear = 400 - 1250 rpm
3rd gear = 700 - 2100 rpm.
4th gear = 1200 - 3600 rpm.
2 pick-up blocks whose displacement is manual over the entire bed
Schenk measuring device with digital display
and some accessories, e.g. many rotor shafts with different Ø and different rotor mounts, please ask!
*
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Hantar permintaan
Telefon & Faks
+49 341 6... iklan
Iklan anda telah berjaya dipadamkan
Berlaku ralat