Mesin penggerek meja
Scharmann Ecocut 1.3

Name: Scharmann Ecocut 1.3
Brand: Scharmann
Availability: InStock

Tahun pembuatan

1983

Keadaan

Terpakai (berfungsi sepenuhnya)

Lokasi

Ljubljana

Mesin penggerek meja Scharmann Ecocut 1.3

Data asas

Nama mesin:: Mesin penggerek meja

Pengeluar:: Scharmann

Model:: Ecocut 1.3

Tahun pembuatan:: 1983

Keadaan:: hampir baru (terpakai)

Fungsi:: berfungsi sepenuhnya

Jam operasi:: 5,500 h

Harga & Lokasi

Lokasi:: Litostrojska cesta 42, 1000 Ljubljana, Slowenien

Hubungi

Butiran teknikal

Dimensi dan berat

Berat keseluruhan:

24,350 kg

Jumlah panjang:

9,000 mm

Lebar keseluruhan:

6,000 mm

Jumlah ketinggian:

4,000 mm

Panjang meja:

1,450 mm

Lebar meja:

1,250 mm

Spindel

Diameter gelendong:

125 mm

Panjang gelendong bor:

600 mm

Pendakap spindel:

MK 5

Kelajuan gelendong (maks.):

3,000 rpm

Kelajuan spindel (min.):

50 rpm

Lejang gelendong:

600 mm

Butiran kuasa

Jenis arus masuk:

Penyaman udara

Lampiran

Jentera

Dokumentasi dan pensijilan

Tahun pembaikan besar terakhir:

2017

Bahan/produk boleh diproses

Berat kepingan kerja (maks.):

12,000 kg

Spesifikasi gandar

Jarak gerakan paksi X:

2,000 mm

Jarak perjalanan paksi-Y:

1,450 mm

Jarak gerakan paksi Z:

1,250 mm

Maklumat lanjut

Tinggi kabinet kawalan:

2,000 mm

Panjang kabinet kawalan:

4,000 mm

Lebar kabinet kawalan:

600 mm

Diameter pemasangan:

50 mm

Beban meja:

12,000 kg

Kelajuan putaran boleh diubah tanpa had

Butiran tawaran

ID iklan:: A23236294

Kemas kini:: terakhir pada 29.10.2026

Penerangan

Coolant system with 4 nozzles and center spindle
Protective door at the operator station
* The machine does not require a foundation but is installed on a specially designed polymer bed, standing 600 mm high.
* Additional feature: A CNC-controlled rotary table is integrated into the boring quill, allowing for the machining of contours up to a diameter of 600 mm.
The machine was electrically and mechanically overhauled by Scharmann, most recently in 2015.
During the overhaul, the entire electrical system was replaced, and the control system was upgraded to Siemens 840 D.
In the mechanical area, for example, the roller bearing shoes and the ball screw in the Z-axis were replaced, as well as the spindle head, including its guide and flyer chains for the counterweights, which were inspected and/or renewed.
In addition, HCR installed a machine enclosure (open at the top), which was integrated into the safety concept, including operating mode 4, by Scharmann.
In 2017, the CNC rotary table, the differential gear, and the boring spindle unit were dismantled and overhauled at the Scharmann factory (new bearings, seals, and gears).
Hedpfxe Agd Ahj Amkjw

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.