Ketuhar permukaanSarnes
600-G/CQI-9
Data mesin
- Nama mesin:
- Ketuhar permukaan
- Pengeluar:
- Sarnes
- Model:
- 600-G/CQI-9
- Nombor mesin:
- 1787
- Tahun pembuatan:
- 2020
- Keadaan:
- sangat baik (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Suhu:
- 1,150 °C
- Jumlah panjang:
- 23,700 mm
- Lebar tali sawat:
- 620 mm
- Kapasiti pemanasan:
- 320 kW (435.08 kuasa kuda)
- Ketinggian laluan:
- 100 mm
penyediaan
- Lokasi:
- Baden-Württemberg, Jerman
– Jarak: lebih kurang 9,837 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
The system has been used very little and is in excellent condition.
TECHNICAL DETAILS
Maximum operating temperature: 1150°C
Conveyor belt width: 620 mm
Installed heating power: 320 kW in 8 zones
Fuel: Natural gas
Operation: Hydrogen + Nitrogen (N2 + H2) integrated
Usable height: 100 mm
Dimensions
Length of infeed table: 2 m
Length of burn-off zone LED3: 1.5 m
Length of sintering zone: 7.5 m
Length of rapid cooling zone: 1 m
Length of convective cooling zone: 2 x 4 m
Length of flame-free outlet with air shower: 2 m
Length of outlet table: 2.7 m
Total length of the system: 23.7 m
Total width of the system: 2.3 m
MACHINE DETAILS
Natural gas consumption: 25 m³/h (80 mbar)
N2 consumption: 45-65 m³/h (max. 80 mbar)
H2 consumption: 0.5 - 15 m³/h (80 mbar)
Cooling water: 3-5 m³/h (non-pressurized; temperature)
EQUIPMENT
Flame-free outlet
Ceramic muffle
Dual thermocouples
Programmable
Online diagnostic system
Low NOx-RS-regenerative burner
SiSiC burner tubes
LED 3 dewaxing zone (utilizing the chemically bound energy of waxes and improved burnout conditions, especially for heavier powder metallurgy parts (>0.9 kg))
"Target-Actual value belt speed adjustment" function
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22095238
- Nombor rujukan:
- AUC-2606124
- Kemas kini:
- terakhir pada 10.06.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.