SAMAG MFZ 2-2

SAMAG MFZ 2-2

This 3-axis SAMAG MFZ 2-2 was manufactured in 2007, featuring a line voltage of 400V, frequency of 50 Hz, and a control voltage of DC 24 V. With a power consumption of 72kW and a weight of 700kg, it includes optional 3D data of the clamping tower. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information about this machine.

• Tool storage
• Type: Decagon
• Number of storage locations: 100 (2x50)
• Number of cassettes: 10
• Cassette locations: 10
• Cassette pitch: 90 mm
• Max. cassette magazine speed: 8.3 min
• Delay time from max. cassette magazine speed to standstill: 300 ms
• Max. tool load mass: 280 kg
• Max. tool weight/plastic collet: 6 kg
• Max. tool weight/steel collet: 8 kg
• Max. tool diameter with free adjacent locations: 160 mm
• Rotation axis: 10x36
• Time to change from nearest cassette (left/right): 1.5 s
• Tool change on spindle, average chip-to-chip (VDI 2852), without wheel rotation: 4.5 s
• Axes and travel paths
• Travel paths
• Y-axis (vertical) working stroke: 500 mm
• Y-axis (vertical) total stroke incl. tool change: 775 mm
• Axis acceleration X/Y: 0.6 xg / 0.8 xg
• Main spindle drive
Tedpfozvvnmex Ag Ejb
• Spindle unit: GMN high-frequency spindle HCS 220-16000/28
• Spindle spacing: 450 mm
• Sleeve diameter: 220 mm
• Weight: 110 kg
• Drive motor: 1FE1 083-4WN11-1BA2
• Torque (S1): 65 Nm
• Torque (S2): 74 Nm
• Workpiece carrier unit
• W-axis swivel unit
• Swivel time 180°: 4.5 s
• Faceplate/counterbearing diameter: 500/345 mm
• Drive/counterbearing speed (max.): 15/20 min
• Mass moment of inertia: 140 kgm²
• Permissible tilting moment: 8,000 Nm
• Permissible tangential moment of drive/counterbearing: 10,000/5,000 Nm
• Locking force of Hirth gearing at 100 bar/counterbearing: 190/175 kN
• Workpiece holder A1/A2 axis
• Parting angle: 3
• Swivel time 180°: 3.5 s
• Faceplate/counterbearing diameter: 345 mm
• Speed (max.): 20 min
• Mass moment of inertia: 20 kgm
• Permissible tilting moment: 3,000 Nm
• Permissible tangential torque drive/counterbearing: 5,000 Nm
• Line voltage: 400 V
• Frequency: 50 Hz
• Control voltage: DC 24 V

Additional equipment

• Cooling lubricant system (scraper belt conveyor)
• Dimensions (L x W x H): 2885 x 1095 x 1830 mm
• Discharge height: 1020 mm
• Gap screen: 500 μm
• Filling volume: 100 l
• Wastewater pump: 380 l/min at 1.6 bar
• Central cooling unit
• Type: DK 160-V/SO
• Cooling capacity: 1900 W
• Min./Max. ambient temperature: 10/40 °C
• Max. water outlet temperature: 20 °C
• Condensation temperature: 40 °C
• Refrigerant: R134a, 2 kg
• Connected electrical power: 5.1 kW
• Clean water tank (empty): 930 kg
• Chip conveyor (empty): 450 kg

Dimensions
Machine Depth 5500 mm