Pusat pemprosesan logam lembaranSalvagnini
P4
Data asas
- Nama mesin:
- Pusat pemprosesan logam lembaran
- Pengeluar:
- Salvagnini
- Model:
- P4
- Tahun pembuatan:
- 2000
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
Bahan/produk boleh diproses
Maklumat lanjut
penyediaan
- Lokasi:
- Baden-Württemberg, Jerman
– Jarak: lebih kurang 9,851 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- EXW
percuma
Penerangan
TECHNICAL DETAILS
Sheet thickness at tensile strength 410 N/mm² max.: 2.00 mm
Sheet thickness at tensile strength 600 N/mm² max.: 1.25 mm
Sheet thickness at tensile strength 265 N/mm² max.: 3.00 mm
Sheet thickness min.: 0.50 mm
Length of notched blank at entry max.: 2,700 mm
Width of notched blank at entry max.: 1,500 mm
Rotatable diagonal of notched blank max.: 2,700 mm
Maximum bending length: 2,500 mm
Space for bendings above the worktable max.: 127 mm
MACHINE DETAILS
Processor: Intel Pentium III, 500 MHz
RAM: 128 MB SDRAM
Graphics memory: 4 MB SGRAM
Hard disk capacity: 9.1 GB
CD-ROM drive: 600 MB
Floppy disk drive: 3.5 inch, 1.44 MB
Network cards: 2
Screen diagonal: 17 inches
Voltage: 400 V
Frequency: 50 Hz
Number of phases: 3
Rated power: 38 kW
Rated current: 64 A
Breaking capacity of main switch: 40 kA
Further technical details can be found in the attached documents.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22605917
- Nombor rujukan:
- AUC-2608137
- Kemas kini:
- terakhir pada 24.08.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Hessen SalvagniniS4 P4
Bliżyn Bumex Sp. z o.o.TPO1590
Hillesheim SalvagniniP4
Gießen Salvagnini S4/P4 Bj.2018 VollausstattungS4Xe. / P4Xe. 3125
Coevorden AOREPH3015 STOCK (6 KW)
Zürich SalvagniniP4-1812.MLA
Birmingham SalvagniniP4-1812
Calcinato RASXXL-Center 75.06-2
Doha SalvagniniP4x-2516
Nordrhein-Westfalen SALVAGNINIP4X 2516
Ringaudai FRONIUSPLASMA WELDING
Birmingham SalvagniniP4
Bayern SalvagniniP4-2516-ALA
Birmingham RASMultibend-Center 79.22-2
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.