Mesin lentur profil dengan suapan hidraulik

SAHINLER Profileinrollmaschine Sahinler HPK 80

angle iron / side length: 80 x 80 x 8double T-iron over x-axis: IPN 120 IPN 80U-iron over x-axis: UPN 140total power requirements: 4weight approx.: 1700messurements (LxWxH): 1.450 x 1.000 x 1.400
Technical specifications

Shaft Diameter: 80mm

Roll diameter: 245 mm

Driven rollers: 3

Motor power: 4 kW
Codpfx Aijd Ab H Tj Terc

Speed: 6 m/min.

Bending performances (cross-section / min. diameter):

Flat bar upright: 100x20 mm / 2000 mm; 80x20mm / 800mm; 30x10 / 300

Flat bar lying: 125x25 mm / 600 mm; 60x5mm / 300mm

Square steel: 45x45 mm / 500 mm; 15x15mm / 380mm

Round steel: Ø 50 mm / 500 mm; Ø 15mm / 380mm

tube: Ø 100x2.5 mm / 1,200 mm; Ø 15x1mm / 380mm; Ø 3x5.48 / 800 mm; Ø 1/2x2.77 / 380 mm

Form tube upright: 80x25x3 mm / 800 mm; 25x15x2mm / 350mm

Form tube square: 70x70x3 mm / 1,300 mm; 25x25x2mm / 350mm

Angle iron leg outside: 80x80x8 mm / 800 mm; 30x30x3mm / 400mm

Angle iron leg inside: 70x70x7 mm / 700 mm; 30x30x3mm / 450mm

UPN leg outside: UPN 140 / 1600 mm; RPN 120 / 900mm; RPN 100 / 800mm

UPN leg inside: UPN 140 / 1,600 mm; RPN 120 / 1000mm; RPN 100 / 800mm

IPN lying: IPN 120 / 600 mm; IPN 80 / 400mm



gear

3 motorized rollers

stable welded steel construction

hydraulic Adjustment of the two bottom rollers

Digital display of the bottom roller positions on a separate control panel

lateral straightening rollers adjustable in 3 axes

can be used horizontally and vertically

Forward and reverse drive

Machine and equipment according to CE regulations




Options:

NC Unit 7 Screen  EURO 9.000,--



We have more than 190 references!