Gunting guillotine hidraulikSafan
M-Shear
Data mesin
- Nama mesin:
- Gunting guillotine hidraulik
- pengeluar:
- Safan
- Model:
- M-Shear
- tahun pembuatan:
- 2007
- Keadaan:
- sedia untuk digunakan (terpakai)
- fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Lebar kerja:
- 3,100 mm
- Sudut pemotongan (min.):
- 0.5 °
- Sudut pemotongan (maks.):
- 3 °
- Ketebalan plat keluli (maks.):
- 13 mm
- Ketebalan lembaran aluminium (maks.):
- 16 mm
- Kelajuan pengukur belakang paksi R:
- 50 mm/s
penyediaan
- Lokasi:
- Woiwodschaft Schlesien, Poland
– Jarak: lebih kurang 9,150 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€1,000.00 (wajib)
percuma
Penerangan
TECHNICAL DETAILS
Sheet thickness steel (max.): 13 mm
Sheet thickness aluminium (max.): 16 mm
Cutting length (max.): 3,100 mm
Cutting angle: 0.5° - 3°
Thickness of the cut sheet (450 N/mm²): 1 - 13 mm
Backgauge speed R-axis: 150 mm/s
Backgauge travel distance Z-axis: 1,000 mm
Length of front support arms (from blade): 1,500 mm
Rear bumper speed: 125 mm/s
Number of cuts at full length: 18/min
Number of cuts at minimum length: 46/min
Min. cutting gap: 0.04 mm
Max. cutting gap: 0.5 mm
Positioning accuracy: +/-0.03 mm
MACHINE DETAILS
Type of incoming current: Three-phase
Main power supply: 3/N/PE - 50Hz - 400/230V
Motor power: 30 kW
Total weight: 12,500 kg
Overall length: 4,000 mm
Overall width: 4,500 mm
Overall height: 2,000 mm
EQUIPMENT
- Documentation/manual
- Finger guard
- Safety light curtain
DESCRIPTION
SafanDarley guillotine shears are equipped with unique technology. The hydraulic control is managed electronically during the cutting process. The amount of power used with this type of solution is calculated according to the thickness
of the material to be cut.
The backlash-free ball screw ram allows positioning accuracy of +/-0.03 mm, while the minimal gap of 0.04 mm ensures a quality cut in materials from 0.5 mm up to the maximum sheet thickness of the machine. The worktable design enables a straight cut even under high load.
The automatic selection of gap and cutting angle according to the material type and thickness, as well as the compensation of the bumper position, allow
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
pemindahan bank
Butiran tawaran
- ID iklan:
- A19892890
- Nombor rujukan:
- AUC-2508159
- kemas kini:
- terakhir pada 02.09.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Drachten SafanHT (M Shear) 310 4
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.