Mesin pemotong laserPrima Power
CV 5000
Data mesin
- Nama mesin:
- Mesin pemotong laser
- Pengeluar:
- Prima Power
- Model:
- CV 5000
- Nombor mesin:
- 150204
- Tahun pembuatan:
- 2016
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 27,875 h
Butiran teknikal
- Jenis laser:
- Laser CO₂
- Panjang gelombang laser:
- 10 nm
penyediaan
- Lokasi:
- Hessen, Jerman
– Jarak: lebih kurang 9,884 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€2,000.00 (wajib)
percuma
Penerangan
No reserve price - guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Laser type: CO₂ laser
Average power: 200–5,000 W
Peak power: up to 6 kW
Wavelength: 10.6 µm
Beam quality factor M²:< 2.4 (typically 2.1–2.3)
Beam divergence: 1.5 mrad (half angle)
Beam diameter at output: 15 mm (1/e)
Beam diameter at output: 21 mm (full beam)
Pulse repetition rate: 0–2 kHz
Pulse width: 250 µs
Pulse resolution: 70 µs (?)
Alignment stability: ± 150 µrad (?)
Wavelength: 635 nm
Output power:< 1 mW
MACHINE DETAILS
Ambient temperature: 10–40 °C
Relative humidity:< 95% (non-condensing)
Connected load: 37 kW
Voltage: 400–460 V AC
Voltage tolerance: ± 10%
Power supply: 3-phase
Required cooling capacity: 45 kW
Flow rate: 133 l/min
Inlet temperature: 18–20 °C
Maximum inlet pressure: 6 bar
Nominal inlet pressure: 3 bar
Differential pressure: 1.5 bar
Coolant: Distilled water with 35% Dowfrost HD
Filter rating: 100 µm
Helium purity: 99.996%
Helium concentration: 67.7%
Helium consumption: 13.4–46.8 SLPH
Carbon monoxide purity: 99.995%
Carbon monoxide concentration: 4.1%
Carbon monoxide consumption: 0.9–3.0 SLPH
Nitrogen purity: 99.996%
Nitrogen concentration: 28.2%
Nitrogen consumption: 5.8–20.2 SLPH
Total gas consumption: 20–70 SLPH
Maximum content of water vapor, hydrocarbons, and oxygen:< 10 ppm
Compressed air: dry
Compressed air dew point:< 2 °C
Operating hours (according to meter): 27,875 h
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22382937
- Nombor rujukan:
- AUC-2607179
- Kemas kini:
- terakhir pada 21.07.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.