Gergaji bulat untuk logam ringan dan aluminium
Pressta Eisele PROFILMA 502

Name: Pressta Eisele PROFILMA 502
Brand: Pressta Eisele
Availability: InStock

Tahun pembuatan

2023

Keadaan

Terpakai (berfungsi sepenuhnya)

Lokasi

Hagen

Gergaji bulat untuk logam ringan dan aluminium Pressta Eisele PROFILMA 502

Data mesin

Nama mesin:: Gergaji bulat untuk logam ringan dan aluminium

Pengeluar:: Pressta Eisele

Model:: PROFILMA 502

Nombor mesin:: 1559

Tahun pembuatan:: 2023

Keadaan:: hampir baru (terpakai)

Fungsi:: berfungsi sepenuhnya

Jam operasi:: 1,809 h

Harga & Lokasi

Lokasi:: Hagen, Jerman

Hubungi

Butiran teknikal

Diameter bilah gergaji:: 550 mm

Panjang suapan paksi X:: 800 mm

Jumlah panjang:: 2,400 mm

Lebar keseluruhan:: 2,000 mm

Jumlah ketinggian:: 1,800 mm

Julat pemotongan keluli bulat pada 90°:: 190 mm

Jenis arus masuk:: tiga fasa

Kelajuan putaran (maks.):: 2,850 rpm

Ketinggian pemotongan (maks.):: 150 mm

Berat keseluruhan:: 1,650 kg

Panjang bahagian (min.):: 3 mm

Panjang bahagian (maks.):: 4,000 mm

Kelajuan bilah gergaji:: 2,850 rpm

Voltan masuk:: 400 V

Pemacu gergaji:: 7,500 W

Diameter pemotongan:: 270 mm

Lubang bilah gergaji:: 40 mm

Butiran tawaran

ID iklan:: A21740938

Kemas kini:: terakhir pada 20.05.2026

Penerangan

Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3

ST Circular Saw Fully Automatic PROFILMA 502
Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side.

Dsdsy Dtpmopfx Ahkjch
MG 3 Chip Extraction
Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.