Mesin pengasah semula tempat duduk plat

Petschauer PLT800

1 used Petschauer PLT800
Godpfxszz Rlko Ah Hjug

Manual machine for re-grinding the seat of carbide saw teeth, with a cutting-off device for carbide saw blades that require repair, with a diameter of 100 to 800 mm, where the carbide teeth are soldered on too long.

This machine is equipped with a double grinding wheel holder and a double saw blade holder for 2 different applications.

Right side: Re-grinding the seat after desoldering, using a 175 mm diameter and 4 mm wide ceramic grinding wheel, with an adjustment scale from 15° negative to 35° positive, and blade thickness adjustment.
Left side: Cutting off carbide teeth that are soldered on too long, using a 150 or 175 mm diameter and approximately 1 mm wide diamond cutting disc. Adjustment scale for rake angle, 15° negative to 35° positive. The cutting-off process takes place at a 0° blade angle.
Additional applications:
Setting the tooth back
Setting the chamfer on TCT saw blades
Face grinding with the help of a diamond grinding wheel
Re-sharpening on the circumference of the saw blade at 0°
Alternate tooth arrangement possible.

Technical data:
Saw diameter: Max. 800 mm
Weight without stand cabinet: 128 kg
Dimensions: Width: 92 cm
Depth: 72 cm
Height: 58 cm
Total power: 0.75 kW
Drive speed: 2600 rpm
Coolant tank: 60 liters
Dimensions: Ceramic grinding wheel 175 mm
Diamond cutting disc: 150 or 175 mm
Operating voltage: 230/400 volts, 3 phases, 50 Hz or 230/440 volts, 3 phases, 60 Hz
Fuse protection: 3 slow-blow fuses 10 A

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.