Tekan panasOtt
Tekan panas
Ott
EXW VB ditambah cukai perkhidmatan
€33,614
Keadaan
Terpakai
Lokasi
Castrop-Rauxel 

Data asas
Harga & Lokasi
EXW VB ditambah cukai perkhidmatan
€33,614
- Lokasi:
- Castrop-Rauxel, Jerman

Hubungi
Butiran teknikal
Dimensi dan berat
Jumlah panjang:
3,000 mm
Lebar keseluruhan:
2,500 mm
Jumlah ketinggian:
2,160 mm
Sistem kuasa hidraulik
Tekanan operasi:
350 palang
Butiran kuasa
Voltan masuk:
400 V
Frekuensi masukan:
50 Hz
Arus masuk:
50 A
Jenis arus masuk:
tiga fasa
Butiran tawaran
- ID iklan:
- A23346404
- Kemas kini:
- terakhir pada 17.11.2026
Penerangan
OTT Hot Press – Modernized Veneer Press, Converted for CFRP and Prepreg Manufacturing
For sale is a modernized OTT veneer press, which has been extensively converted into a high-performance hot press for CFRP manufacturing.
The press has been technically modernized and equipped with a new, PLC-controlled heating and temperature control system. It is particularly suitable for the processing of CFRP prepregs as well as for applications with heated aluminum dies.
Through freely programmable temperature profiles, multi-stage heating ramps, and additional measuring options for direct temperature monitoring in the workpiece, the system offers high flexibility for different manufacturing processes.
Another special feature is the additional controllable pneumatic system with an operating pressure of up to 30 bar. This allows an internal pressure to be built up in hollow-body components during the pressing process. This opens up additional possibilities in the production of complex CFRP components.
Technical data
- Manufacturer: OTT
- Machine type: Modernized veneer press / hot press
- Press area: 2,250 x 750 mm
- Total pressure: 100 tons
- Hydraulic pressure: 350 bar
- Hydraulics: 4 cylinders, each with a diameter of 100 mm
- Cylinders: Overhauled and newly sealed by a specialist company
- Control: Siemens PLC S7-1200 G2
- Maximum operating temperature: 180 °C
- Heating rate: up to 4 K/min
- Additional pneumatic system: Controllable, up to 30 bar operating pressure
Heating system and temperature control
The press features new, PLC-controlled heating plates from Busse.
Equipment:
Ibodpfxo Aktifj Adred
- 4 heating elements in the heating plates (2 top, 2 bottom)
- 4 temperature sensors for monitoring the heating plates
- 8 PLC-controlled outputs for additional heating cartridges
- 8 slots for temperature sensors of the additional heating cartridges
- 2 additional sensors for direct temperature monitoring in the workpiece
Pneumatic system for hollow-body components
In addition, the press is equipped with a controllable pneumatic system that allows an operating pressure of up to 30 bar.
During the pressing process, a defined internal pressure can be applied to hollow-body components.
Particularly interesting for:
- Production of CFRP hollow-body components
- Processing of prepregs with internal pressurization
- Complex fiber composite structures
- Special forming processes in the composite field
Control and process control
The temperature control is carried out via a Siemens PLC S7-1200 G2.
The following process parameters can be individually set and programmed:
- Heating rate
- Multi-stage heating ramps
- Start temperature
- End temperature
- Holding temperature at the end of the cycle
- Pre-programming and storage of different program cycles
This allows different temperature profiles to be implemented for different materials and manufacturing processes.
Possible applications
The press has been specifically optimized for use in CFRP manufacturing.
Particularly suitable for:
- CFRP prepreg processing
- Production of fiber composite components
- Production of CFRP hollow-body components with internal pressurization
- Processing of prepregs in heated aluminum dies
- Trial and prototype manufacturing
- Other applications in the field of heated molding
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
For sale is a modernized OTT veneer press, which has been extensively converted into a high-performance hot press for CFRP manufacturing.
The press has been technically modernized and equipped with a new, PLC-controlled heating and temperature control system. It is particularly suitable for the processing of CFRP prepregs as well as for applications with heated aluminum dies.
Through freely programmable temperature profiles, multi-stage heating ramps, and additional measuring options for direct temperature monitoring in the workpiece, the system offers high flexibility for different manufacturing processes.
Another special feature is the additional controllable pneumatic system with an operating pressure of up to 30 bar. This allows an internal pressure to be built up in hollow-body components during the pressing process. This opens up additional possibilities in the production of complex CFRP components.
Technical data
- Manufacturer: OTT
- Machine type: Modernized veneer press / hot press
- Press area: 2,250 x 750 mm
- Total pressure: 100 tons
- Hydraulic pressure: 350 bar
- Hydraulics: 4 cylinders, each with a diameter of 100 mm
- Cylinders: Overhauled and newly sealed by a specialist company
- Control: Siemens PLC S7-1200 G2
- Maximum operating temperature: 180 °C
- Heating rate: up to 4 K/min
- Additional pneumatic system: Controllable, up to 30 bar operating pressure
Heating system and temperature control
The press features new, PLC-controlled heating plates from Busse.
Equipment:
Ibodpfxo Aktifj Adred
- 4 heating elements in the heating plates (2 top, 2 bottom)
- 4 temperature sensors for monitoring the heating plates
- 8 PLC-controlled outputs for additional heating cartridges
- 8 slots for temperature sensors of the additional heating cartridges
- 2 additional sensors for direct temperature monitoring in the workpiece
Pneumatic system for hollow-body components
In addition, the press is equipped with a controllable pneumatic system that allows an operating pressure of up to 30 bar.
During the pressing process, a defined internal pressure can be applied to hollow-body components.
Particularly interesting for:
- Production of CFRP hollow-body components
- Processing of prepregs with internal pressurization
- Complex fiber composite structures
- Special forming processes in the composite field
Control and process control
The temperature control is carried out via a Siemens PLC S7-1200 G2.
The following process parameters can be individually set and programmed:
- Heating rate
- Multi-stage heating ramps
- Start temperature
- End temperature
- Holding temperature at the end of the cycle
- Pre-programming and storage of different program cycles
This allows different temperature profiles to be implemented for different materials and manufacturing processes.
Possible applications
The press has been specifically optimized for use in CFRP manufacturing.
Particularly suitable for:
- CFRP prepreg processing
- Production of fiber composite components
- Production of CFRP hollow-body components with internal pressurization
- Processing of prepregs in heated aluminum dies
- Trial and prototype manufacturing
- Other applications in the field of heated molding
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pembekal
Nota: Daftar secara percuma atau log masuk, untuk mengakses semua maklumat.
Kali terakhir dalam talian: Semalam
Didaftarkan sejak: 2025
1 Iklan dalam talian
Hantar permintaan
Telefon & Faks
+49 1573 ... iklan
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Spatenhof
9,419 km
Mesin pembalut pinggir
OttTornado FÜ + PU
OttTornado FÜ + PU
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Röllbach
9,857 km
Mesin penekan venir
OTTSTABIL 3013/135
OTTSTABIL 3013/135
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Sveti Jurij ob Ščavnici
9,368 km
Mesin pembalut pinggir
OttPacific V6-F
OttPacific V6-F
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Wioska
9,357 km
Tekan venir OTT JU 60-S
OttJunior JU 60 S
OttJunior JU 60 S
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Gerolzhofen
9,777 km
Mesin pembalut pinggir
OTTKantomat K55
OTTKantomat K55
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Gerolzhofen
9,777 km
Mesin pengikat tepi
OttKantomat 156-FÜ
OttKantomat 156-FÜ
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Spatenhof
9,419 km
Mesin pembalut pinggir
OttTornado TOP
OttTornado TOP
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Reichertshofen
9,700 km
Mesin pengamplas sabuk lebar
OttOmega 1100
OttOmega 1100
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Gronau (Westfalen)
9,981 km
Mesin pembalut pinggir
OttTopEdge DUO
OttTopEdge DUO
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Michelstadt
9,871 km
Mesin pembalut pinggir
OttTornado Top
OttTornado Top
Iklan anda telah berjaya dipadamkan
Berlaku ralat






































































































