Mesin kimpalan laserOR Laser
HTS 200 W
Data asas
- Nama mesin:
- Mesin kimpalan laser
- Pengeluar:
- OR Laser
- Model:
- HTS 200 W
- Nombor mesin:
- 0720
- Tahun pembuatan:
- 2015
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
Dimensi dan berat
Laser
Spesifikasi gandar
penyediaan
- Lokasi:
- Brandenburg, Jerman
– Jarak: lebih kurang 9,536 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
A comprehensive service costing €5,000 was recently performed on the system by the manufacturer.
The lamp, mirror, and cooling circuit pump were replaced.
The system was initially used as an exhibit from 2015 to 2018. From 2020, the system was used at approximately 50% capacity, and from 2023, only one day per week!
Ideal for toolmaking, repair, or die casting restoration!
TECHNICAL DETAILS
Laser type: Nd:YAG
Laser source: LS-PEC 200
Average power max.: 200 W
Pulse peak power: 9 kW
Pulse energy: max. 100 J
Pulse duration: 0.4–20 ms
Pulse frequency: 1–20 Hz (100 Hz)
Focus diameter: 0.2–2.0 mm
Positioning speed: 0.5–15 mm/s
X-axis travel: 700 mm
Y-axis travel: 400 mm
Z-axis travel: 570 mm
MACHINE DETAILS
Electrical connection data
Mains voltage: 400 V
Phases: 3
Mains frequency: 50 Hz
Dimensions & Weight
Dimensions (L x W x H): 950 x 1,550 x 1,250 mm
Weight: 370 kg
Total pulses: 56527413
EQUIPMENT
Joystick control
LED lighting
Swivel device for the resonator for welding large molds
Protective gas supply controlled directly via a solenoid valve
Heavy-duty castors
Laser resonator including resonator mechanism
Laser rod
Resonator cavity
Resonator mirror
Safety shutter
Power supply including mains fuse
Mains disconnect switch
Emergency stop switch
Motor protection switch
Interface with hardware monitoring function
Lamp switch
Industrial controller
Capacitor bank
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Jenis pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22328827
- Nombor rujukan:
- AUC-2607059
- Kemas kini:
- terakhir pada 17.07.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Szigetszentmiklós EWAGRS 12
Weißenburg in Bayern NetstalSynergy 1000-230
Trenčianske Stankovce Arburg570 C 2000-800
Jerman WMW ZeulenrodaPYE 25 S1
Karlsbad Erowa, System 3R, Becker ErodiertechnikER-021128, ER-017646,3R-239-545-9911-V01
Mudersbach LFSSDPM 1070/100
Turnau WEINIGRondamat 960
Jerman SchneebergerCorvus GDS 650
Malsch HURTHZSA 320
Erwitte Glorystar LaserGM Fiber Laser Marking Machine
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.