Mesin pemotong pancutan airOMAX
60120
Data mesin
- Nama mesin:
- Mesin pemotong pancutan air
- Pengeluar:
- OMAX
- Model:
- 60120
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Jarak gerakan paksi Z:
- 203 mm
- Panjang kerja:
- 3,200 mm
- Lebar kerja:
- 1,575 mm
penyediaan
- Lokasi:
- Baden-Württemberg, Jerman
– Jarak: lebih kurang 9,875 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€2,000.00 (wajib)
percuma
Penerangan
The technical data is based on manufacturer information. The seller cannot provide any guarantee for this!
TECHNICAL DETAILS
X-Axis Working Area: 3,200 mm
Y-Axis Working Area: 1,575 mm
Z-Axis Travel: 203 mm
Table Size: 3,658 x 1,956 mm
Maximum Material Load: 1,950 kg/m²
Speed: 4,572 mm/min
MACHINE DETAILS
Electrical connection: 3-phase, 380–480 V AC ±10 %
Frequency: 50–60 Hz
Linear positioning accuracy: ±0.025 mm
Repeatability: ±0.025 mm
Ballbar roundness accuracy: ±0.064 mm
Dimensions and Weight
Footprint with control: 5,715 x 2,794 mm
Weight, empty tank: 2,812 kg
Height with scissor high-pressure piping: 2,921 mm
Operating weight: 10,545 kg
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A21931443
- Nombor rujukan:
- AUC-2605082
- Kemas kini:
- terakhir pada 15.05.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Gdańsk Omax60120 JetMachining Center
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.