Pusat pusingan dan pengilangan CNCOKUMA
MacTurn 50
Data mesin
- Nama mesin:
- Pusat pusingan dan pengilangan CNC
- Pengeluar:
- OKUMA
- Model:
- MacTurn 50
- Nombor mesin:
- 0082
- Tahun pembuatan:
- 2000
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 21,269 h
Butiran teknikal
- Panjang pemesinan bubut:
- 1,500 mm
- Diameter pusingan:
- 580 mm
- Jarak gerakan paksi X:
- 598 mm
- Jarak perjalanan paksi-Y:
- 230 mm
- Jarak gerakan paksi Z:
- 1,660 mm
penyediaan
- Lokasi:
- Nordrhein-Westfalen, Jerman
– Jarak: lebih kurang 9,913 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€2,000.00 (wajib)
percuma
Penerangan
TECHNICAL DETAILS
Travel X-axis: 598 mm
Travel Y-axis: 230 mm
Travel Z-axis: 1,660 mm
Max. turning diameter: 580 mm
Turning length: 1,500 mm
Swing diameter over bed: 610 mm
Swing diameter over cross slide: 580 mm
Main spindle
Main spindle speed range: 12 - 2,800 rpm
Spindle bearing diameter: 150 mm
Spindle bore: 110 mm
Spindle nose: JIS A2-11
Main spindle drive power: 37 (30) kW
C-axis accuracy: 0.001°
Rapid traverse X/Y: 12,000 mm/min
Rapid traverse Z: 20,000 mm/min
Rapid traverse C: 100 rpm
Cutting feed rate: 0.001 - 1,000 mm/rev
Tool turret
Type: H2 ATC
Number of tool stations: 2 (1x L-Tool / 1x M-Tool) pos.
Driven stations: stepless
Speed range - driven tool stations: 40 - 3,000 rpm
Tool shank height: 25 mm
Boring bar diameter: 50 mm
Tailstock
Quill diameter: 120 mm
Quill stroke: 170 mm
Tailstock taper: MT 5
Tool magazine
Number of tool positions: 50 pos.
Tool holder: MAS BT 50
Max. tool diameter: 170 mm
Max. tool length: 350 mm
Max. tool weight: 20 kg
Magazine drive: 3.2 kW
MACHINE DETAILS
Total power requirement: 53 kVA
Dimensions & weight
Installation area: 6.0 x 3.2 x 3.0 m
Machine weight: 18.5 t
Operating hours
Main switch on-time: 79,607 h
NC operating hours: 27,814 h
Main spindle hours: 21,269 h
EQUIPMENT
Chip conveyor
Central coolant system
High-pressure cooling 20 bar
Tailstock
Signal lamp
C-axis
Y-axis
Hydraulic unit
Steady rest
Various tool holders (44 pcs.)
Three-jaw chuck Schunk - ROTA NC 400-120
Electronic handwheel
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A21605008
- Nombor rujukan:
- AUC-2603327
- Kemas kini:
- terakhir pada 27.03.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Oelde OKUMAMacTurn 50
Nordrhein-Westfalen OkumaMacTurn 50
Norweg OkumaMacTurn 50 x 1500
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.