Pelarik CNCOKUMA
LU 300-MY 2SC980 SIMULTURN
Data mesin
- Nama mesin:
- Pelarik CNC
- Pengeluar:
- OKUMA
- Nombor mesin:
- 162881
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Diameter pusing di atas sled silang:
- 410 mm
- Panjang pemesinan bubut:
- 1,000 mm
- Diameter pusingan:
- 340 mm
- Lubang gelendong:
- 80 mm
- Kelajuan putaran (maks.):
- 3,800 rpm
penyediaan
- Lokasi:
- Toscana, Itali
– Jarak: lebih kurang 9,756 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
Swinging diameter over bed: 530 mm
Swinging diameter over slide/carriage: 410 mm
Distance between centers: 1,000.00 mm
Maximum turning diameter: 340 mm
Maximum machining length: 1,000 mm
Travel X-axis: 260 mm
Travel Z-axis: 1,016 mm
Travel X-axis (secondary): 139 mm
Travel Z-axis (secondary): 965 mm
C-axis: 360°
Control system: Okuma OSP-P200LA
Spindle speed: 38 – 3,800 rpm
Speed ranges: stepless, automatic range selection
Spindle nose: Option A2-8 Big Bore
Spindle bore: 80 mm
Main drive motor: 22.37 kW
Torque: 412.17 Nm
Upper multitasking turret: V-12 NC turret
Lower turret: V8 (VDI)
Indexing time without lifting: 0.18 s
Speed of driven tools: 45 – 4,500 rpm
Motor for driven tools: 7.08 kW
Feed rates X/Z: 333.16 / 416.56 mm/s
Feed rate C: 3.333 rpm
Tailstock spindle diameter: 90 mm
Tailstock taper: MK #5
Tailstock stroke: 120 mm
MACHINE DETAILS
Machine weight: 8,800 kg
Supply voltage: 220/480 V
Phases: 3-phase
Frequency: 60 Hz
Rated apparent power: 31 kVA
Full load current: 81.7/37.5 A
Largest motor rated current: 96 A
Short-circuit rated values: 30/10 kA
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22018793
- Nombor rujukan:
- AUC-2605224
- Kemas kini:
- terakhir pada 03.06.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.