Pusat pemesinan menegak 5 paksiOKK
VP 400
Data asas
- Nama mesin:
- Pusat pemesinan menegak 5 paksi
- Pengeluar:
- OKK
- Model:
- VP 400
- Tahun pembuatan:
- 2004
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
Spindel
Spesifikasi gandar
Maklumat lanjut
penyediaan
- Lokasi:
- Hessen, Jerman
– Jarak: lebih kurang 9,887 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
percuma
percuma
Penerangan
No reserve price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Travel distances
X-axis: 600 mm
Y-axis: 410 mm
Z-axis: 460 mm
A-axis: –120 to +30 °
C-axis: 360 °
Spindle
Speed range: 100 to 12,000 rpm
Speed adjustment: stepless
Spindle taper: 7/24 taper size 40
Spindle bearing inner diameter: 65 mm
Distances
Distance from table surface to spindle nose: 70 to 530 mm
Distance from column front to spindle center: 620 mm
Table
Working area diameter: 350 mm
Max. workpiece weight: 200 kg
Table height above floor: 1,080 mm
Feed
Rapid traverse X and Y-axis: 48 m/min
Rapid traverse Z-axis: 36 m/min
Rapid traverse A-axis: 22.2 rpm
Rapid traverse C-axis: 33.3 rpm
Working feed X, Y and Z axis: 1 to 36,000 mm/min
Working feed A-axis: 22.2 rpm
Working feed C-axis: 33.3 rpm
Tool changer
Tool holder: JIS B 6339 BT40
Pull stud: MAS 403 P40T-1
Tool magazine: 20 tools
Max. tool diameter: 110 mm
Max. tool diameter when adjacent pockets are occupied: 82 mm
Max. tool length from reference line: 300 mm
Max. tool weight: 7 kg
Tool change time chip-to-chip: 1.2 s
Tool change time cut-to-cut: 3.8 s
MACHINE DETAILS
Control model: FANUC Series 160iS-MB
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A22432942
- Nombor rujukan:
- AUC-2607212
- Kemas kini:
- terakhir pada 27.07.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Bienne WilleminW-508 MT
Jerman WMW HECKERTCWK 500D
Olching DMGDMF 360-11 linear
Jerman INGERSOLL-BOHLE
Ljubljana - Šentvid KitamuraHX250iF
Jerman ChironFZ 15 S
Nashik MazakVARIAXIS 500-5X
Metzingen ZEISSUMC 850/1200
Root MIKRONUCP 600
Wilbertoord FANUCRobodrill a-D21miA5
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.