Pelarik CNC

NAKAMURA-TOME WT-300

NAKAMURA-TOME WT-300 CNC Lathe

- Operating voltage: 200/220 V
- Frequency: 50/60 Hz
- Main circuit breaker: 300 A
- Transformer: 93.4 kVA
- Max. diameter (upper side): 199 mm
- Max. diameter (lower side): 270 mm
- Distance between spindle heads: max. 1100 mm / min. 250 mm
- Max. bar capacity: 102 mm (left side), 65 mm (right side)
- Chuck size (left side): 305 mm, (right side): 210 mm
- Turret force (X-axis) X1: 11,000 N, X2: 11,000 N
- Turret force (Z-axis) Z1: 9,000 N, Z2: 6,000 N
- Turret force (Y-axis): 6,000 N
- Travel X1: 152 mm, X2: 195 mm
- Travel Z1 + Z2: 780 mm
- Y-axis travel: ±40 mm
- B2 axis travel: 850 mm
- Spindle speed: 2,500 rpm
- Spindle bore: 120 mm
- Front bearing inner diameter: 160 mm
- Draw tube bore: 103 mm
- Spindle center height: 1,228 mm
- Spindle speed R: 4,500 rpm
- Spindle bore: 80 mm
- Front bearing inner diameter: 110 mm
- Draw tube bore: 66 mm
- Spindle support: 2-point
- C-axis
- Rapid traverse speed: 600 rpm
- Cutting feed rate: 1 - 4,800 °/min
- Upper turret: 12-station turret
- Number of tool stations: 24
- Number of turret indexing positions: 24
- Turret outer diameter: 406 mm
- Turret thickness: 100 mm
- Tool clearance: 641 mm
- Turret clamping force: 30 kN
- Tool dimensions: 20 and 25 mm
- Internal turning tool mounting bore diameter: 25/32 mm
- Lower turret type: 24-station turret
- Turret outer diameter: 365 mm
- Turret thickness: 100 mm
- Tool clearance: 600 mm
- Tool dimensions: 20/25 mm
- Driven tool spindles on upper and lower turrets
- Spindle speed: 3,600 rpm
- Number of spindle speed ranges: stepless
- Number of tool positions: 12
- Toolholder types and sizes: longitudinal holder: 20, transverse holder
- Thread cutting holder (longitudinal): M3 - M10
- Thread cutting holder (transverse): M3 - M10
- Cutting and feed speeds X1 and X2: 16,000 mm/min
- Cutting and feed speeds Z1 and Z2: 27,000 mm/min
- Cutting and feed speed B2 axis: 27,000 mm/min
- Cutting and feed speed Y-axis: 6,000 mm/min
- Feed rate X1 and X2: 1 - 4,800 mm/min
- Feed rate Z1 and Z2 axis: 1 - 4,800 mm/min
- Feed rate B-axis: 1 - 4,800 mm/min
- Feed rate Y-axis: 1 - 4,800 mm/min
- Including the tool holders visible in the photos as well as two HAINBUCH collet chucks in the main and counter spindle
- Also includes chip conveyor and transformer
Gjdjx Tzp Topfx Afpoil
- With documentation

Note: The item must be collected by firm appointment between 18 and 26 February 2026, exact date to be agreed in advance.

FCA D-78087 Mönchweiler – loaded onto truck

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.