Treler industri PA65-2 – muatan 40 t

Multi-Trans PA65-2

Operating conditions:
The trailer is designed for use on level and paved surfaces for internal plant transport.

Towing vehicle type designation:
unknown

Load to be transported:
unknown

Multiple trailer operation:
The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling).

Payload:
40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification.

Main frame:
Robust welded construction made from profile steel sections.

Loading platform:
Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection.

Steering:
All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV).

Undercarriage:
4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication.

Paint finish:
Top coat RAL 5002 Ultramarine Blue.

Additional equipment:
2 lashing bars on each long side.

Ffedpfxsxrtlue Afysu
For rental or sale EU-wide.

Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.