Pencincang kayu, pencincang, penggodam

muetek MRZ 630 ECO - 18,5 kW

*Options eagainst surcharge - see below

Included:
+ Profile rotor for higher throughput

We are at your disposal for a free test with your material. For this purpose I invite you to visit us in Neckartailfingen. It is also possible that you send us your material by forwarding and we document the test with pictures and videos.

Motor: 18,5 kW; 400 V - 50 Hz - 3 ph
Knives: 15 pieces, multiple rotatable,
option double row of knives + 995 € net

rotor diameter: 260 mm
control: SPS Siemens S7-1200
cutter opening 630 x 820 mm
hopper volume approx. 0,6 qbm
hydraulically operated slide
screen perforation at choice (10 - 40mm)
suction nozzle Ø 160 mm
weight approx. 1.300 kg
dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm
moisture content: < 30 % Atro.
.
Included as standard:
- V-rotor for maximum throughput
- control cabinet with Siemens SPS control
- automatic star/delta start-up
- fast hydraulics
- auto. OFF when rotor is idle
- speed 70-90 rpm for high throughput
- cycle control to avoid idle time
- performance enhancing step control of hydraulic slide valve
- Pertinax guides for hydraulic slides
- vibration absorbing machine feet
- CE Conform.
.
Options shredder at extra cost:

- Shredder set higher by 30 cm (preparation for conveyor belt) + 2.080 € net.

- Eco-rings: + 1.980 € net
(recommended for more than 20 % hardwood)

- Double row of knives + 995 € net

- Special scraper + 990 € net
(recommended when shredding veneer or paper, or things with a material thickness smaller than 3 mm)

- Bend conveyor belt + 8.770 € net
angle: 0-60 degrees adjustable
discharge height: approx. 2000 mm

- automatic overband magnet + 5.980 € net

Alternatively fixed magnet block above the conveyor belt for regular manual scraping + 990 € net (with little metal part accumulation)

- Control of conveyor belt and over belt magnet + 2.750 € net
(start and stop synchronously to the chipper) alternatively start and stop of the belts by hand + 595 € net
.
Requirements to the raw material:
- The moisture content (atro) must be below 30%.
Ry2ojkfiu
- Installation temperature: tempered room at least +5°C
- Metals and mineral impurities such as sand, stones, etc. cause increased wear

Iklan telah diterjemahkan secara automatik. Ralat terjemahan adalah mungkin.