Mesin pengisar jenis katilMTE
Kompakt Plus
Mesin pengisar jenis katil
MTE
Kompakt Plus
Harga permulaan
€8,500
Tahun pembuatan
2004
Keadaan
Terpakai
(berfungsi sepenuhnya)
Lokasi
Nordrhein-Westfalen 

Pantau lelong
Data asas
- Nama mesin:
- Mesin pengisar jenis katil
- Pengeluar:
- MTE
- Model:
- Kompakt Plus
- Nombor mesin:
- 04120594
- Tahun pembuatan:
- 2004
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
- Jam operasi:
- 29,337 h
Butiran teknikal
Spindel
Kelajuan gelendong (maks.):
12,000 rpm
Spesifikasi gandar
Jarak gerakan paksi X:
2,000 mm
Jarak perjalanan paksi-Y:
895 mm
Jarak gerakan paksi Z:
895 mm
Maklumat lanjut
Model pengawal:
Heidenhain iTNC 530
penyediaan
- Lokasi:
- Nordrhein-Westfalen, Jerman
– Jarak: lebih kurang 9,972 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- EXW
Kos lepas pasang & kos memuatkan:
Pengambilan di lokasi:
percuma
percuma
Kos penghantaran:
Penerangan
TECHNICAL DETAILS
Table size: 2,200 × 750 mm
Travel range X-axis: approx. 2,000 mm
Travel range Y-axis: approx. 895 mm
Travel range Z-axis: approx. 895 mm
Spindle manufacturer: FAEMAT
Spindle type: FA 250 CUV
Spindle cooling: water-cooled
Tool holder: SK50
Spindle speed: max. 12,000 rpm
MACHINE DETAILS
Control system: Heidenhain iTNC 530
Operating hours
Last recorded program runtime: 29,337 h
Machine operating hours: 70,185 h
Control system operating hours: 132,104 h
EQUIPMENT
Automatic universal milling head
Tool changer
Complete enclosure
Separate cooling unit (year of manufacture 2020)
The spindle has been repaired by a specialist company in the past and subsequently tested. A corresponding test report and various repair and service documents are available upon request.
Ibedpo Aknvwsfx Adrsd
The machine has a known startup error in the X-axis that has existed for approximately ten years. When starting up, the error message “C380 – Motor X cannot be controlled” sometimes appears. To start the machine, it may be necessary to move the X-motor manually and repeat the startup process several times. Once the machine is running, it operates reliably and without any problems in processing mode, according to our long-standing experience.
The machine is still in productive use.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Table size: 2,200 × 750 mm
Travel range X-axis: approx. 2,000 mm
Travel range Y-axis: approx. 895 mm
Travel range Z-axis: approx. 895 mm
Spindle manufacturer: FAEMAT
Spindle type: FA 250 CUV
Spindle cooling: water-cooled
Tool holder: SK50
Spindle speed: max. 12,000 rpm
MACHINE DETAILS
Control system: Heidenhain iTNC 530
Operating hours
Last recorded program runtime: 29,337 h
Machine operating hours: 70,185 h
Control system operating hours: 132,104 h
EQUIPMENT
Automatic universal milling head
Tool changer
Complete enclosure
Separate cooling unit (year of manufacture 2020)
The spindle has been repaired by a specialist company in the past and subsequently tested. A corresponding test report and various repair and service documents are available upon request.
Ibedpo Aknvwsfx Adrsd
The machine has a known startup error in the X-axis that has existed for approximately ten years. When starting up, the error message “C380 – Motor X cannot be controlled” sometimes appears. To start the machine, it may be necessary to move the X-motor manually and repeat the startup process several times. Once the machine is running, it operates reliably and without any problems in processing mode, according to our long-standing experience.
The machine is still in productive use.
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Jenis pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A23342642
- Nombor rujukan:
- AUC-2611420
- Kemas kini:
- terakhir pada 16.11.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Boleh dilihat
Mesin sedang dialiri arus listrik
Machineseeker mengesyorkan supaya mesin diperiksa terlebih dahulu secara amnya.
Semua maklumat diberikan mengikut pengetahuan dan niat baik terbaik – sila sahkan sendiri di lokasi.
Iklan-iklan ini juga mungkin menarik minat anda.
Berjaya
Mesej anda telah dihantar.
Iklan kecil
Dortmund
9,960 km
Mesin pengilangan katil CNC
MTEKompakt Plus
MTEKompakt Plus
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Iklan anda telah berjaya dipadamkan
Berlaku ralat























