Mesin pengukur koordinatMitutoyo
Crysta - Apex C574
Data mesin
- Nama mesin:
- Mesin pengukur koordinat
- Pengeluar:
- Mitutoyo
- Model:
- Crysta - Apex C574
- Tahun pembuatan:
- 2006
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
- Julat pengukuran paksi X:
- 505 mm
- Julat pengukuran paksi Y:
- 705 mm
- Julat pengukuran paksi Z:
- 405 mm
- Lebar meja:
- 638 mm
- Panjang meja:
- 1,160 mm
- Beban meja:
- 180 kg
penyediaan
- Lokasi:
- Bayern, Jerman
– Jarak: lebih kurang 9,677 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- EXW
percuma
Penerangan
TECHNICAL DETAILS
Measuring range X: 505 mm
Measuring range Y: 705 mm
Measuring range Z: 405 mm
Guide method: Air bearing on each axis
Drive speed CNC mode: 8 to 300 mm/s
Drive speed joystick mode: 0 to 80 mm/s
Measuring system: Linear encoder
Resolution: 0.001 mm
Measuring table material: Granite
Table size (workpiece clamping area): 638 x 1160 mm
Workpiece clamping: M8 x 1.25
Maximum workpiece height: 545 mm
Maximum workpiece weight: 180 kg
MACHINE DETAILS
Machine height: 2,185 mm
Machine width: 1,082 mm
Machine depth: 1,122 mm
Machine weight (incl. stand and control): 440 / 515 kg
Power supply (installation): Single-phase 100 to 240 VAC, 50/60 Hz, grounding type D
Power supply capacity: 700 VA
Air pressure: 0.4 MPa
EQUIPMENT
- Air consumption 50 l/min (under standard conditions)
- Temperature and floor evenness must comply with the requirements of "1.2.1 Environmental Conditions".
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A19888340
- Nombor rujukan:
- AUC-2508186
- Kemas kini:
- terakhir pada 05.09.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Jerman MITUTOYOCrysta-ApexC 574
Aumühle ca. 2,9 lfm Werkbank, Arbeitstisch
Stuttgart MitutoyoCrysta Apex C7106
Wiesbaden Johann Fischer Aschaffenburg
Tuttlingen MitutoyoCrysta-STRATO 9106 FAL A910
Weilheim an der Teck Carl Zeiss IMT GmbHPrismo 9/12/7 VAST XT
Jerman MITUTOYOSURFTEST SV-500
Switzerland MITUTOYOCrysta APEX C 164012
Urk Atlas CopcoSF8 + FF HC
Schwäbisch Gmünd GOMAtos III
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.