Pusat pemesinan sejagatMIKRON
UCP 1350
Data mesin
- Nama mesin:
- Pusat pemesinan sejagat
- Pengeluar:
- MIKRON
- Model:
- UCP 1350
- Nombor mesin:
- 730
- Tahun pembuatan:
- 2001
- Keadaan:
- tidak diuji (terpakai)
- Fungsi:
- belum diuji
- Jam operasi:
- 3,260 h
Butiran teknikal
- Jarak gerakan paksi X:
- 1,350 mm
- Jarak perjalanan paksi-Y:
- 1,150 mm
- Jarak gerakan paksi Z:
- 685 mm
- Berat kepingan kerja (maks.):
- 1,500 kg
- Kelajuan gelendong (maks.):
- 12,000 rpm
penyediaan
- Lokasi:
- Brandenburg, Jerman
– Jarak: lebih kurang 9,564 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€1,200.00 (wajib)
percuma
Penerangan
No reserve price – guaranteed sale to the highest bidder!
Placing a bid obligates timely collection between 01.12.2025 and 05.12.2025!
TECHNICAL DETAILS
Travel paths
Travel X: 1,350 mm
Travel Y: 1,150 mm
Travel Z (vertical): 685 mm
Travel Z (horizontal): 870 mm
Spindle
Working spindle: 0 – 12,000 rpm
Acceleration time: approx. 2.5 s
Tool holder: HSK-A63
Tool data
Tool magazine: 46-position changer
Number of magazine places: 46
Max. tool diameter (fully loaded): 80 mm
Max. tool diameter (partially loaded): 130 mm
Max. tool weight: 8 kg
Max. tool length: 300 mm
Max. magazine load: 200 kg
Chip-to-chip time: 9–12 sec H/H
Feed rates and rapid traverse
Rapid traverse X, Y, Z: 30 m/min
Table
NC rotary table diameter: 1,100 mm
Clamping surface: Ø 1,100 x 1,000 mm
Table load: 1,500 kg
Centering bore: Ø 50H6
Table height above floor: approx. 1,120 mm
Swivel axis (A-axis): +15° to -120°
Control: HEIDENHAIN TNC 426
MACHINE DETAILS
Spindle hours: 3,260 h
Machine power-on hours: 82,797 h
Dimensions & weight
Machine weight: approx. 12,000 kg
Space requirements (L x W x H): 4,130 x 3,680 x 3,150 mm
EQUIPMENT
RENISHAW OMP60 probe
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A20567470
- Nombor rujukan:
- AUC-2511204
- Kemas kini:
- terakhir pada 19.11.2025
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Brandenburg MIKRONUCP 1350
Courbevoie mikronVCP600
Kanada GLEASON- PFAUTER100 S
Fohnsdorf ATM Recyclingsystems GmbHPaketierpresse SP 100 AK-2
Gussago Daewoo (Doosan)ACE VC500
Dieburg OKUMAEuro Center V50
Jerman SCHUETTEAF32S Dnt
Essen TAKRAF/TEICHMANN
Wermelskirchen Hans SchoenUTE FF 300/80
Szigetszentmiklós Deckel MahoDMU200P
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.