Mesin pemotong plasmaMesser
MultiTherm 4000
Data asas
- Nama mesin:
- Mesin pemotong plasma
- Pengeluar:
- Messer
- Model:
- MultiTherm 4000
- Nombor mesin:
- 286.001.911.20
- Tahun pembuatan:
- 2020
- Keadaan:
- sedia untuk digunakan (terpakai)
- Fungsi:
- berfungsi sepenuhnya
Butiran teknikal
penyediaan
- Lokasi:
- Baden-Württemberg, Jerman
– Jarak: lebih kurang 9,862 km
- Ketersediaan:
- segera selepas lelongan berakhir
- Syarat penghantaran:
- FCA
€3,000.00 (wajib)
percuma
Penerangan
No reserve price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Working area: 3,000 x 6,000 mm
Number of cutting torches: 2
Gas flow control: available
MACHINE DETAILS
Footprint: 9,000 x 5,000 x 2,000 mm
Control system: Global Control S with 15-inch color touchscreen
Electrical data
Voltage: 3 x 400 V PE/N
Frequency: 50 Hz
Power: 9 kVA
ATTENTION: The Zinser cutting table is not included in the scope of delivery!
EQUIPMENT according to original invoice – subject to change
Joystick and handwheel for Global Control S panel
Cooling for the control cabinet
Laser diode
Heat protection plate without air cooling
Track for double-sided longitudinal drive HEB 9 m
OmniFlow oxy-fuel supply up to 70 m³/h
ALFA machine torch with internal ignition
SmartLifter 200
SensoMat ARKI
Full gas addressing
Light barriers
Safety device wheel housing with foot switch
Energy supply via energy chain, oxy-fuel, 9 m
Carrier for the energy chain
Further technical data from the manufacturer – subject to change:
Gauge: 4,000 mm
Chain height: 500 mm
Positioning speed: 50 m/min
Speed: max. 35 m/min
Dimensions & weight
Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm
Machine weight: 2,200 kg
Iklan ini diterjemahkan secara automatik. Mungkin terdapat kesilapan terjemahan.
Dokumen
Pemprosesan pembayaran
- Kos tambahan pembelian:
- 18 %
- Syarat pembayaran:
- 100 % bayaran pendahuluan
- Cara pembayaran:
Pemindahan bank
Butiran tawaran
- ID iklan:
- A21232697
- Nombor rujukan:
- AUC-2602145
- Kemas kini:
- terakhir pada 16.02.2026
- Tawaran eksklusif:
- hanya tersedia melalui lelong
lawatan
Jerman MesserMultitherm 4000 mit Skew Rotator
Nordhausen DEMAGHubmotor Getriebe Mantel Trommel
Jerman MesserMultitherm 4000
OIching MesserMultiTherm 4000
Nitra HidroliksanH1000
Minareliçavuş OSB DYAS MachineryDYAS 3 BDC - 1200
Sofia SMERALKJH 4
Dorsten JungheinrichEFG 425 K
Ahaus ATLANTICHPAT 40.300
Jerman COMEC1.650 x Ø 165 mm
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-tanda kepercayaan
Apakah itu sijil kepercayaan?
Machineseeker mensertifikatkan peniaga terpilih dengan meterai kepercayaan Machineseeker. Sebelum pemberian, pemeriksaan yang distandardisasi dan menyeluruh dilakukan oleh staf berpengalaman Machineseeker.
Apa yang kami periksa?
Pemeriksaan
lesen perniagaan atau ekstrak daftar perniagaan
Pemeriksaan
alamat pos penjual
Pengesahan
sambungan bank
Pengesahan
kebolehcapaian telefon
untuk nombor utama
Maklumat ekonomi
tidak boleh mengandungi ciri-ciri negatif
Aduan pembeli
boleh menyebabkan penarikan semula sijilApakah maksudnya ini bagi anda sebagai pembeli?
Melalui cop kepercayaan Machineseeker, anda sebagai pembeli dapat mengenal pasti peniaga yang dipercayai tanpa pemeriksaan sendiri yang sangat berkemungkinan menjalankan perniagaan secara jujur dan beretika.
Sudah tentu, semasa proses pembelian, perbezaan pendapat masih boleh berlaku. Machineseeker tidak bertanggungjawab terhadap pelanggaran undang-undang oleh pembeli atau penjual yang aktif di Machineseeker.