Gergaji jalur, mitra dua, separa automatik

MEBAbase 24DG-HS

MEBAbase: The must-have for doers.

The starter saws in the MEBAbase series are suitable for a wide range of applications and are reliable all-rounders. Whether for your hobby in the garage, craftsmen or metalworkers - there is something for everyone.

The portfolio ranges from small manual mitre saws to automatic straight-cutting machines and is therefore the basis for your workshop.

The universally applicable MEBAbase 24 DG mitre bandsaw machine is ergonomically sophisticated and has an optimum price-performance ratio.

Simple centralised operation.

Technical data

Cutting range
90° - 240 - 310x240
45°l. - 200 - 200x200
45°r. - 200 - 200x200
30°r. - 140 - 200x140
Remaining piece length 60mm
Cutting speed 35 and 75m/min pole switchable
Drive - saw blade 1.10/1.8kW; 3 x 400V, 50Hz
Saw frame feed Infinitely variable up to 200mm/min, hydraulically adjustable
Saw blade tension Mechanical
Saw blade dimensions 2910 x 27 x 0.9mm
Working height 900mm (without set-up elements)
Weight 470kg
Dimensions 800 x 1750 x 1500mm

Basic equipment of the MEBAbase 24 DG

Hfodonfvl Sopfx Af Eon
MEBA mitre system: Large, swivelling table prevents sawing into the material support surface - low wear costs! The material is always clamped at right angles close to the saw blade.
Manual mitre adjustment from 90° - 30°, infinitely variable according to scale to 1.0° accuracy
The mitre pivot point is the intersection point between the saw blade and the material system, which is why the length dimension does not change when the angle is changed
End stops at 30° - 45° - 90° - 45°
Hydraulic quick material clamping. The material is clamped in parallel at 90° for every angular position of the saw frame.
Centralised machine operation
Cutting pressure reduction due to the dead weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via hydraulic damping cylinder and weight equalisation spring
Saw blade drive with limit stop
Stepless clamping jaw adjustment
Movable band guide arm, adjustment to material width
Saw blade deflection roller carbide guide
Practical chip collection tray with drip tray
Rotating chip cleaning brush
Mechanical saw blade tensioning
Operating instructions and spare parts list (digital)
1 MEBA bimetal band saw blade 4/6 ZpZ mounted on machine
Complete coolant system Paint finish anthracite (RAL 7016)

Subject to technical changes. You will receive details of the exact delivery time in the order confirmation.