Mazak Variaxis 500 tahun 2011

Mazak Variaxis 500

MACHINE SPECIFICATION MAZAK VARIAXIS 500-5X II

Robot is not included.

- X travel (spindle longitudinal travel): 510 mm
- Y travel (table transverse travel): 510 mm
- Z travel (spindle vertical travel): 460 mm
- A-axis (table tilt): -120° to +30°
- C-axis (table rotation): ±360°

Spindle:

- Spindle motor AC: 22.0 kW / 15 min rating
- Rapid traverse X, Y, Z: 52 m/min
- Tool magazine: 40 stations
- Spindle taper: ISO 40
- Spindle motor AC: 22.0 kW / 15 min
- Spindle bearing bore / outer diameter: Ø 80 / 110 mm
- Speed range: 35 – 12,000 rpm
- Max torque: 143 Nm @ 15% ED

Axes details:

X-axis (spindle longitudinal travel)

- Travel: 510 mm
- Rapid feed rate: 52 m/min
- Working feed rate: 1 – 52,000 mm/min
- Guides: Linear ball guides

Y-axis (table transverse travel)

- Travel: 510 mm
- Rapid feed rate: 52 m/min
- Working feed rate: 1 – 52,000 mm/min
- Guides: Linear ball guides

Z-axis (spindle vertical travel)

- Travel: 460 mm
- Spindle nose to table top distance: 190 – 650 mm
- Spindle nose to table center distance: 140 – 600 mm
- Rapid feed rate: 52 m/min
Duedpfeygimlsx Am Ejt
- Working feed rate: 1 – 52,000 mm/min

A-axis (table tilt)

- Range: -120° to +30°
- Minimum positioning increment: 0.0001°
- Locking torque: 2,156 Nm
- Positioning time for 90°: 1.9 s

C-axis (table rotation)

- Range: ±360°
- Minimum positioning increment: 0.0001°
- Locking torque: 2,156 Nm
- Positioning time for 90°: 1.5 s

Accuracy:

- Positioning accuracy X, Y, Z: 0.012 mm
- Positioning accuracy A, C: 21 / 14 arc sec
- Repeatability X, Y, Z: 0.007 mm
- Repeatability A, C: 12 / 8 arc sec

Tool changer:

- Type: Chain with double arm
- Number of tool positions: 40 stations
- Tool selection: shortest path search
- Max tool diameter: Ø 80 mm
- Max tool diameter when adjacent pocket is empty: Ø 125 mm
- Max tool weight: 8 kg
- Max tool length: 300 mm
- Tool taper: CAT 40
- Pull stud: ANSI 40 type Mazak
- Tool change time (chip-to-chip): approx. 4.5 s

Table:

- Table size: Ø 500 mm x 400 mm
- Max uniformly distributed load: 300 kg
- Table equipped with T-slots: 5 slots, 80 mm pitch
- Center hole: Ø 50 H6
- Table height above floor: approx. 800 mm

Coolant:

- Through-spindle coolant: 15 bar
- Tank capacity: approx. 250 L
- Coolant filtration: filter
- Flush nozzle: at spindle nose

Miscellaneous:

- Floor space (standard machine): approx. 2805 x 2950 mm
- Machine height (standard): approx. 2838 mm
- Weight: approx. 7,500 kg
- Total fuse / power supply requirement: 50 kVA

Included / options and features:

- 40 tool stations
- Tool identification system including pull stud with ID chip
- Tool length measurement
- Through-spindle coolant 15 bar + Through-Air
- Spindle cooling
- Machine lighting
- Cooling through the ball screws on X, Y, and Z axes
- HSM function for 2-D machining
- Mazak “Tornado” for threading and milling
- Synchronized feed/speed during threading
- ISO/EIA programming
- CE marking in accordance with European regulations

VARIAXIS500II – Quantity: 1 unit

MAZAK VARIAXIS 500-II 5X

Vertical 5-axis multi-operation machine equipped with Mazatrol Matrix control system for simultaneous (ISO‑programmed) 4- and 5‑axis machining.

Options / items listed:

- MAZ85330 – 1 pcs – Through-spindle coolant, 15 bar
- MAZ80551 – 1 pcs – Chip conveyor to side
- MAZ71190X – 1 pcs – High-speed function type 1, only for ISO/EIA

- High-speed function MAZACC-3D G05 P2
- Smooth transitions G61.1
- Contour compensation via parameter settings